Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1199

Ducati 1199 Ducati 1199 Forum - Ducati 1199 Panigale Superbike Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
Old Apr 9th 2014, 12:04 PM   #1
Junior Member
 
Joined: Apr 2014
From: richmond va

Posts: 18
Thanks: 7

CNC clutch slave install issue

Just installed a cnc slave cylinder today and ran into a couple issues just wanted to share how i solved them.Basic install straight forward no problems,but could not get slave cylinder to bleed out i filled the slave cylinder with brake fluid prior to install but could not get preassure in the system i even used vacume bleeder and noticed that no matter what the level in the reservoir did not drop never figured this issue out but was able to get slave cylinder to work by opening bleeder screw at slave cylinder and attaching hose to bleeder and putting other end in a bottle of brake fluid and pulling vacume at mc bleeder,this worked pretty well but still dont understand why fluid level in reservoir doesnt drop.
any ideas would be welcomed.....
72racer is offline  
 
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1199

Tags
clutch, cnc, install, issue, slave



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
2012 early model clutch issue ? B1199S Ducati 1199 3 Mar 9th 2014 08:23 PM
oberon clutch slave, neutral issue asphaltkisser Mechanical and Technical 8 Feb 7th 2014 10:00 AM
Clutch Slave Cylinder TransNone13 Mechanical and Technical 22 Dec 22nd 2013 07:04 PM
Clutch Issue - need opinions ttkarp Mechanical and Technical 10 Aug 29th 2013 12:02 PM
New clutch slave, frame plugs, case covers, and rad. guard. TransNone13 Ducati 1199 13 Mar 10th 2013 10:19 PM


Facebook Twitter Google+ RSS Feed