Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1199

Ducati 1199 Ducati 1199 Forum - Ducati 1199 Panigale Superbike Motorcycle Forum


Thanks Tree4Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Jan 22nd 2016, 12:54 AM   #1
Junior Member
 
Joined: Oct 2014
From: Netherlands

Posts: 18
Thanks: 4

Bike won't start after Tuneboy install

Yesterday i finally got around to installing the Tuneboy quick shifter and mapping. Installation was pretty straight forward so i had no issues. After reprogramming the ECU i turned off the bike as was told and turned it back on some 30 seconds later. When i tried to start it however it didn't fire up. It turns over and i can smell the fuel, it sometimes almost fires up but just can't do it.

After trying several times the battery got low so i recharged it using an optimate (12.6v) and tried again this morning without luck. Still smells like fuel and by the sounds of it almost turns on but just can't.

I tried reverting back to the standard map which doesn't help. I also tried reflashing several times varying between Wi-Fi and the USB connection.

I hope someone can point me in the right direction as where to look for because i'm pretty much lost at the moment.
Djauweh is offline  
 
Old Jan 22nd 2016, 01:52 AM   #2
Senior Member
 
Joined: Jan 2015
From: Australia

Posts: 482
Thanks: 154

You had unlocked ECU correctly?

You uploaded the correct "Tune" file and at lease 1x "Trim" file?

No progress errors or freezing during upload?
DStyleNZL is offline  
Old Jan 22nd 2016, 02:15 AM   #3
Junior Member
 
Joined: Oct 2014
From: Netherlands

Posts: 18
Thanks: 4

I followed the instructions to the point. I used the 1199 Akrapovic tune and the Akrapovic_2 trim as the first trim and the regular Akrapovic trim as second.

There were no errors during flashing. When i open the trim program it sees the correct trim and i can make adjustments.

I also just checked all the fuses which are ok.

Last edited by Djauweh; Jan 22nd 2016 at 03:02 AM.
Djauweh is offline  
Old Jan 22nd 2016, 06:44 AM   #4
Senior Member
 
Joined: May 2012
From: IA, US

Posts: 317
Thanks: 61

Originally Posted by Djauweh View Post
I followed the instructions to the point. I used the 1199 Akrapovic tune and the Akrapovic_2 trim as the first trim and the regular Akrapovic trim as second.

There were no errors during flashing. When i open the trim program it sees the correct trim and i can make adjustments.

I also just checked all the fuses which are ok.
Does it fire back up after you return everything to stock/oem?
thewoot is offline  
Old Jan 22nd 2016, 09:22 AM   #5
Senior Member
 
Claymore's Avatar
 
Joined: Sep 2012
From: South Africa

Posts: 1,329
Thanks: 501

I Ride: Ducati Panigale S Tricolore
Originally Posted by Djauweh View Post
I tried reverting back to the standard map which doesn't help. I also tried reflashing several times varying between Wi-Fi and the USB connection.
.
Originally Posted by thewoot View Post
Does it fire back up after you return everything to stock/oem?
Thanks from thewoot
Claymore is offline  
Old Jan 22nd 2016, 09:33 AM   #6
SPJ
Senior Member
 
Joined: Feb 2012
From: England

Posts: 578
Thanks: 197

Sounds like the software is working ok, as a precaution you could download the files again in case one of them was corrupted, I think someone may have had that problem before although it's rare.
The only other thing that springs to mind is the quick shifter. I'm assuming it kills the ignition, perhaps try unplugging it and see if it starts.
Thanks from Djauweh
SPJ is offline  
Old Jan 22nd 2016, 11:52 AM   #7
Junior Member
 
Joined: Oct 2014
From: Netherlands

Posts: 18
Thanks: 4

The Tuneboy website doesn't contain the files for the 1199, is there a link where i can download them from?

Checking the quick shifter sounds like a good idea, if it's faulty it could explain why the bike doesn't start. I will check this tomorrow!
Djauweh is offline  
Old Jan 22nd 2016, 02:30 PM   #8
Senior Member
 
jock39racer's Avatar
 
Joined: Nov 2012
From: South Australia

Posts: 614
Thanks: 312

I Ride: 2012 Panigale S
Originally Posted by Djauweh View Post
Yesterday i finally got around to installing the Tuneboy quick shifter and mapping. Installation was pretty straight forward so i had no issues. After reprogramming the ECU i turned off the bike as was told and turned it back on some 30 seconds later. When i tried to start it however it didn't fire up. It turns over and i can smell the fuel, it sometimes almost fires up but just can't do it.

After trying several times the battery got low so i recharged it using an optimate (12.6v) and tried again this morning without luck. Still smells like fuel and by the sounds of it almost turns on but just can't.

I tried reverting back to the standard map which doesn't help. I also tried reflashing several times varying between Wi-Fi and the USB connection.

I hope someone can point me in the right direction as where to look for because i'm pretty much lost at the moment.
I had the same issue and was luckily enough to get Wayne on the phone (and in a good mood). The key to that issue was that once you load the ECU, reload it again then turn the bike off and wait until the high pitched sound from the ECU running stops, turn the bike on and fingers crossed it starts.

It worked for me, but I do have the 1199.
jock39racer is offline  
Old Jan 22nd 2016, 02:48 PM   #9
Senior Member
 
Joined: May 2012
From: IA, US

Posts: 317
Thanks: 61

Originally Posted by Claymore View Post
Apparently, I was having a moment HAHAHA. I shouldn't be on the forum and talking on the phone and working lol

I definitely deserve that emoticon

Last edited by thewoot; Jan 22nd 2016 at 03:00 PM.
thewoot is offline  
Old Jan 22nd 2016, 02:59 PM   #10
Senior Member
 
Joined: May 2012
From: IA, US

Posts: 317
Thanks: 61

Originally Posted by Djauweh View Post
The Tuneboy website doesn't contain the files for the 1199, is there a link where i can download them from?

Checking the quick shifter sounds like a good idea, if it's faulty it could explain why the bike doesn't start. I will check this tomorrow!
I went straight to there URL for all the downloads and found one sole Panigale Standard map. Looks like there's both a US and a Generic Tune file which I'm assuming is EU. You probably want the one that says "Panigale_STD_0206Tune.dat"

http://www.tuneboy.com.au/TuneDownlo...e_STD_0206.php

Good luck!

Last edited by thewoot; Jan 22nd 2016 at 03:02 PM.
thewoot is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1199

Tags
bike, install, start, tuneboy



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
bike won't start chris420r Mechanical and Technical 11 Nov 30th 2015 10:16 PM
CEL light after Rapid Bike install cosmok Mechanical and Technical 1 Jul 26th 2015 05:54 PM
KICKSTAND FELL OFF! Bike wont start now! Help!! azimmerlyjr Ducati 1199 13 May 6th 2014 07:53 AM
Bike won't start apeluv Ducati 1199 71 Oct 29th 2013 10:11 AM
Not a 'hard start' but a NO START Chadf80 Ducati 1199 7 Sep 5th 2012 12:00 PM


Facebook Twitter Google+ RSS Feed