Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1199

Ducati 1199 Ducati 1199 Forum - Ducati 1199 Panigale Superbike Motorcycle Forum


Thanks Tree4Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Apr 15th 2013, 11:13 AM   #1
Member
 
Joined: May 2012
From: Ohio

Posts: 53
Thanks: 4

Installing clear clutch cover question

Just got my clear clutch cover from BellissiMoto and had a question. Is this as stright forward as it seems. Just take off the cover and replace the parts or is there something else im missing like oil dripping all over and parts flying out Thanks SPM
SeanPatrick is offline  
 
Old Apr 15th 2013, 11:49 AM   #2
Senior Member
 
knutts's Avatar
 
Joined: Aug 2012
From: Northern, VA

Posts: 141
Thanks: 20

I Ride: '12 Panigale "Base"
It is a wet clutch so some oil may drip. Not a lot should come out and perhaps hardly any if the bike has sat a little. Too be safe, I would place a clean oil pan and reuse any oil that comes out or just buy some beforehand.
Thanks from SeanPatrick
knutts is offline  
Old Apr 15th 2013, 11:49 AM   #3
Senior Member
 
knutts's Avatar
 
Joined: Aug 2012
From: Northern, VA

Posts: 141
Thanks: 20

I Ride: '12 Panigale "Base"
Post pics after the install too!
knutts is offline  
Old Apr 15th 2013, 12:01 PM   #4
Senior Member
 
knutts's Avatar
 
Joined: Aug 2012
From: Northern, VA

Posts: 141
Thanks: 20

I Ride: '12 Panigale "Base"
By the way no parts will fly out. Just make sure you reuse the gasket if the new cover did not come with one.
knutts is offline  
Old Apr 15th 2013, 12:27 PM   #5
Senior Member
 
MUNDMAN's Avatar
 
Joined: Aug 2012
From: ALBUQUERQUE, NM USA

Posts: 782
Thanks: 160

I Ride: Panigale Tricolore, 2010 KTM 990 SMR, 2002 HD Heritage Springer
Put it on the sidestand b4 taking off cover
MUNDMAN is offline  
Old Apr 15th 2013, 12:34 PM   #6
Senior Member
 
AntiHero's Avatar
 
Joined: Nov 2011
From: Round the World on an 1199

Posts: 2,084
Thanks: 2247

No oil will drip if on the sidestand. The only thing you have to worry about is the thin o-ring that you'll need to carefully remove from the stock cover. Use an o-ring pick, or a needle or (as I did) a very small hex key wrench.

Once that's out, you'll insert it into the new cover. Press it in at the 12, 3, 6 and 9 oclock positions, then press it in in between 12 and 3, 3 and 6, etc., and then press it in the rest of the way. If you press it in at 12 and then try to work your way around, you'll stretch the o-ring and have a good 2" of it at the end that won't push in.

All of the bolts to the cover are the same size, fyi. And you don't have to remove the fairing, just the closest bolts to the cover.
Thanks from SeanPatrick and Marmoot
AntiHero is offline  
Old Apr 15th 2013, 06:34 PM   #7
Member
 
Joined: May 2012
From: Ohio

Posts: 53
Thanks: 4

Thanks guys, I got it on and looks pretty good. The colored peice that is bolted on the inside with 3 bolts was interesting. I slowly unscrewed it a little on each bolt. then put the custom colored peice on and slowly screwed it in with no problems. When i get everything done ill post some pics. Thanks again Now Im trying to figure out how to install my rizoma throttle side grip. Im lost hopefully someone on here installed one? SPM
SeanPatrick is offline  
Old Apr 15th 2013, 07:42 PM   #8
Senior Member
 
Whoopazz's Avatar
 
Joined: Oct 2012
From: Edmt, AB

Posts: 869
Thanks: 413

I Ride: 1299
pix!
Whoopazz is offline  
Old Apr 16th 2013, 01:01 AM   #9
Member
 
Joined: Mar 2013
From: Vancouver, BC

Posts: 96
Thanks: 6

I Ride: 2012 Panigale S ABS
Originally Posted by SeanPatrick View Post
Thanks guys, I got it on and looks pretty good. The colored peice that is bolted on the inside with 3 bolts was interesting. I slowly unscrewed it a little on each bolt. then put the custom colored peice on and slowly screwed it in with no problems. When i get everything done ill post some pics. Thanks again Now Im trying to figure out how to install my rizoma throttle side grip. Im lost hopefully someone on here installed one? SPM
Unfortunately, you cannot install a Rizoma grip on the throttle side as they come with the throttle tube inserted in the grip. They are meant for cable controlled throttles and not for the ride by wires on Panis. Not sure if Rizoma is developing one for the Pani or not.
huckjai is offline  
Old Apr 16th 2013, 04:56 PM   #10
Member
 
Joined: May 2012
From: Ohio

Posts: 53
Thanks: 4

Some Pics

Heres some pics
Attached Thumbnails
Installing clear clutch cover question-img_2634.jpg   Installing clear clutch cover question-img_2706.jpg   Installing clear clutch cover question-img_2707.jpg   Installing clear clutch cover question-img_2710.jpg   Installing clear clutch cover question-img_2711.jpg  

Installing clear clutch cover question-img_2712.jpg  
Thanks from centeroff
SeanPatrick is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1199

Tags
clear, clutch, cover, installing, question



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Ducabike clear clutch cover install? DarkNight Mechanical and Technical 3 Jan 2nd 2016 05:10 AM
clutch cover. what did you get? BlueBear Ducati 1199 37 May 23rd 2013 02:37 AM
Question about installing rear set SeanPatrick Mechanical and Technical 3 Mar 16th 2013 06:41 PM
Question on installing Rizoma rearsets Adriandzo Mechanical and Technical 2 Feb 5th 2013 08:42 AM
CNC clutch cover gilesr6 Ducati 1199 6 Dec 29th 2012 01:28 PM


Facebook Twitter Google+ RSS Feed