Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1299

Ducati 1299 Ducati 1299 Forum - Ducati 1299 Panigale Superbike Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
Old Aug 17th 2016, 08:57 PM   #1
Senior Member
 
Joined: Aug 2015
From: USA

Posts: 1,106
Thanks: 1070

Brembo Billet Clutch Master Cylinder Ratio Swap??

Does anyone know if the Brembo Billet Racing Master Cylinder (clutch) 16x16 and 16x18 use the same body?(they are both obviously 16mm pistons) Can I take an 18 lever from a 16x18, replace the 16 lever on the 16x16 and get a 16x18? or are the pivot pins on 16x16 and 16x18 located differently? Thanks guys
endodoc is offline  
 
Old Aug 17th 2016, 11:13 PM   #2
Senior Member
 
Joined: Mar 2016
From: NorCal

Posts: 615
Thanks: 176

I Ride: Panigale R, 1098R, 996S
i can't comment on this directly, but i know there are separate brake levers for the 19x20 and 19x18 master cylinders. I'd guess that unless you have the RCS version, they're probably going to have different pivot pins that require specific levers
timwu12 is offline  
Old Aug 17th 2016, 11:31 PM   #3
Senior Member
 
Joined: Aug 2015
From: USA

Posts: 1,106
Thanks: 1070

Correct. The difference between the 19x18 and the 19x20 is in the lever itself. The body on both has a 19mm piston assembly and the lever pins are in the same place. The difference in the levers is that the barrel/pushrod on the 18 is 2mm closer to the lever pin. So I reasoned that the 16mm body and the 16mm and 18mm lever configurations should be consistent and therefore by swapping 16 and 18 levers give me the option to have either.
endodoc is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1299

Tags
billet, brembo, clutch, cylinder, master, ratio, swap



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Brembo front brake master cylinder: Only produced for the Superleggera? Gecko Ducati Superleggera 9 Mar 1st 2017 09:07 PM
For Sale: 1 BREMBO billet radial Clutch MC 16x18 / 2 Brembo Folding levers ducdom Classifieds 0 Jun 2nd 2013 11:24 PM
Clutch Master Cylinder NOT Bleeding TransNone13 Mechanical and Technical 4 Nov 12th 2012 12:09 PM


Facebook Twitter Google+ RSS Feed