Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1299

Ducati 1299 Ducati 1299 Forum - Ducati 1299 Panigale Superbike Motorcycle Forum


Thanks Tree4Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Mar 5th 2019, 11:05 PM   #1
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

Motoholders IMU mount ?

I have searched previous threads , but cant find a definitive answer.
What is the angle in degrees from horizontal to place the IMU. I have been battling for a couple of years inconsistent DWC and "inertial Sensor errors". I purchased my bike with a motoholders stay already fitted . I have just fabricated a mount with 4 vibration isolation blocks as using only two was probably giving to much movement.
Also when the Inertial Sensor Error does activate does DWC, ABS, and TC not work or move into a more safer default setting until reset ?
Help appreciated
Calderara di Reno is offline  
 
Old Mar 7th 2019, 09:27 PM   #2
Junior Member
 
Joined: Jan 2016
From: germany

Posts: 18
Thanks: 6

Just to push it up, i have no answers, only more questions.
45į?, makes sense, measured from a SSTK, but this is not the stock imu.
Maybe the position is also, more or less, important.
did you compare the softness of yours with the original rubbers?
chris16 is offline  
Old Mar 7th 2019, 10:38 PM   #3
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

Trouble is Iíve never seen oem.
The Moto Holders is crap in that everything was fabricated crooked. The piece of RHS they used for the IMU mount was twisted and points forward but to the right. The dash mount has the dash lower on the left side . I have managed to correct most of this with my fabricated bracket but he angle would be great to know. Mine is set at 27 degrees from horizontal.
Calderara di Reno is offline  
Old Mar 8th 2019, 06:25 AM   #4
Junior Member
 
Joined: Jan 2016
From: germany

Posts: 18
Thanks: 6

Damn, i have no pics, the 1299 is on the run...
easiest is, get the oem plastic piece 25 and rubbers etc.
mount it on a Sheet Alu. And mount this straight vertical (if i remember correct).

edit: found a pic
measured from the pic: 35į, not valid
Attached Images
File Type: jpg 2019-03-08 16_13_25-SBK_1299S_Teile.pdf - SumatraPDF.jpg (85.0 KB, 12 views)
File Type: jpg IMG_20180516_091559_DRO.jpg (36.5 KB, 13 views)
Thanks from Calderara di Reno

Last edited by chris16; Mar 8th 2019 at 07:03 AM.
chris16 is offline  
Old Mar 8th 2019, 07:59 AM   #5
Junior Member
 
Joined: Sep 2018
From: WA

Posts: 27
Thanks: 9

I Ride: 2008 1098S, 2016 1299S, 2015 KTM RC390, 2015 BMW R1200GS, 1963 Honda CT200
I've also got the MotoHolders front fairing stay on the 1299 that I am rebuilding. To make matters even more confusing, it mounts the IMU pointed up instead of pointed down like stock. I contacted the retailer and they said that after 'extensive' testing that it worked fine in that position.

I have not ridden the bike yet, but once started and static I get no codes...who knows what will happen once I get it moving...
Thanks from Calderara di Reno
Raider78 is offline  
Old Mar 8th 2019, 12:00 PM   #6
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

IMG_0617.jpg
Calderara di Reno is offline  
Old Mar 8th 2019, 02:45 PM   #7
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

These are the plates i made with the isolator mounts
https://www.dropbox.com/s/e8pw2654s3..._0617.jpg?dl=0
Calderara di Reno is offline  
Old Mar 8th 2019, 03:01 PM   #8
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

Shows the RHS that has two threaded holes that match the IMU . Initially I bolted directly to it with some rubber grommets . Then i used two isolator blocks but had to much movement side to side. Now as in the photo I have made 2 plates and 4 isolating blocks.
The angle from horizontal with the bike on the ground is 26-27 degrees , this is dictated by Motoholders RHS bracket.
I have just fitted one of Troy Bayliss's FE engines so want all the electronic aids working ! (214 RWHP)
https://www.dropbox.com/s/tasokyi2t7..._0618.jpg?dl=0
Calderara di Reno is offline  
Old Mar 8th 2019, 03:07 PM   #9
Senior Member
 
Calderara di Reno's Avatar
 
Joined: Oct 2016
From: Australia

Posts: 403
Thanks: 185

Found this set up for Euro https://www.dropbox.com/s/3oe3goersu....png.jpeg?dl=0
Calderara di Reno is offline  
Old Mar 8th 2019, 04:36 PM   #10
Senior Member
 
Twistedracer's Avatar
 
Joined: Apr 2013
From: Spanaway, Wa

Posts: 2,106
Thanks: 1150

I Ride: 16R; 18 R1M
When I looked at the stock mounting on the headlight before switching to the Motoholders, it was about 45 degrees from vertical.
Iíve drilled out the mounting plate to accept the grommets, and used collars so the grommets wouldnít compress much to enable dampening.
Iíll be trying this setup out in June.
Previously the IMU was mounted to firm.


Twistedracer is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1299

Tags
imu, motoholders, mount



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Motoholders subframe mrjonnylee Ducati 1199 8 Apr 2nd 2018 01:10 PM
Termi 2-1-2 high mount vs Zard 2-1-2 high mount, also question for Bren Pump Fake Ducati 1199 1 Mar 16th 2018 12:30 PM
best GoPro mount ever? aka. "mount off plates" Phl Mechanical and Technical 2 Oct 23rd 2013 10:22 AM
Want To Buy: DP Rear Mount n umber plate mount R36 Want To Buy 3 Dec 11th 2012 02:33 AM
Prepare to Mount...............Mount!!!! Gunny Fitz Ducati 1199 6 Aug 6th 2012 05:12 PM


Facebook Twitter Google+ RSS Feed