Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1199 > Ducati 899

Ducati 899 Ducati 899 Forum - Ducati 899 Panigale Superbike Motorcycle Forum


Thanks Tree2Thanks
  • 1 Post By DLIT
  • 1 Post By bradp51
Reply
 
LinkBack Thread Tools Display Modes
Old Mar 7th 2016, 07:42 PM   #1
Junior Member
 
Joined: Apr 2015
From: California

Posts: 7
Thanks: 0

Help in replacing front sprocket!!

Hi Guys,

I am waiting for my chain and sprocket replacement kit from sprocket center. Its the same stock set up 15t/44t.

my question, is there a DIY for the front sprocket? based on the manual I have remove the bracket that is on the way?? is there a quick way to go about doing this??

any info is appreciated!!!

thanks!

C
4cmt68 is offline  
 
Old Mar 7th 2016, 09:33 PM   #2
Senior Member
 
bradp51's Avatar
 
Joined: Mar 2012
From: Sydney, New South Wales, Australia

Posts: 2,613
Thanks: 1184

I Ride: 2012 1199S - 2006 Husaberg 450E BMW K1300S 1978 Ducati 900SSD
Originally Posted by 4cmt68 View Post
Hi Guys,

I am waiting for my chain and sprocket replacement kit from sprocket center. Its the same stock set up 15t/44t.

my question, is there a DIY for the front sprocket? based on the manual I have remove the bracket that is on the way?? is there a quick way to go about doing this??

any info is appreciated!!!

thanks!

C
What do you mean by DIY (do it yourself) ?
bradp51 is offline  
Old Mar 7th 2016, 09:40 PM   #3
Junior Member
 
Joined: Apr 2015
From: California

Posts: 7
Thanks: 0

yes, i was looking for one but cant find any. if anyone has done it please let me know what i need to do..
4cmt68 is offline  
Old Mar 8th 2016, 12:30 PM   #4
Senior Member
 
Joined: Jun 2015
From: Omaha, NE

Posts: 199
Thanks: 44

Is there a quick way to remove the sprocket cover? It's like 3 screws. Undo them and take it off.
DLIT is offline  
Old Mar 8th 2016, 12:44 PM   #5
Junior Member
 
Joined: Apr 2015
From: California

Posts: 7
Thanks: 0

Originally Posted by DLIT View Post
Is there a quick way to remove the sprocket cover? It's like 3 screws. Undo them and take it off.
Help in replacing front sprocket!!-frontsprocket.jpg


in the pic, i can remove the gear selector and front sprocket cover. My question is, do i have enough clearance to pull the sprocket out after unscrewing the bolt without having to take off the plate/bracket??? where the foot pegs are mounted..

i just want to know if anyone has done this?

Last edited by 4cmt68; Mar 8th 2016 at 12:45 PM. Reason: wording
4cmt68 is offline  
Old Mar 8th 2016, 02:52 PM   #6
Senior Member
 
Joined: Jun 2015
From: Omaha, NE

Posts: 199
Thanks: 44

I have an 1199 and I was able to remove the sprocket without removing the piece you're asking about just fine.
Thanks from 4cmt68
DLIT is offline  
Old Mar 8th 2016, 08:47 PM   #7
Junior Member
 
Joined: Apr 2015
From: California

Posts: 7
Thanks: 0

Originally Posted by DLIT View Post
I have an 1199 and I was able to remove the sprocket without removing the piece you're asking about just fine.
thanks DLIT!
4cmt68 is offline  
Old Mar 9th 2016, 01:39 AM   #8
Senior Member
 
bradp51's Avatar
 
Joined: Mar 2012
From: Sydney, New South Wales, Australia

Posts: 2,613
Thanks: 1184

I Ride: 2012 1199S - 2006 Husaberg 450E BMW K1300S 1978 Ducati 900SSD
Originally Posted by 4cmt68 View Post
Attachment 17557


in the pic, i can remove the gear selector and front sprocket cover. My question is, do i have enough clearance to pull the sprocket out after unscrewing the bolt without having to take off the plate/bracket??? where the foot pegs are mounted..

i just want to know if anyone has done this?

When did it I took off a lot more stuff there just to make it easy to get to and give it all a good clean. But I did not remove the foot peg brackets. Apart from time its not hard to do.

I sometimes take photos to make sure I line up everything properly. I am guessing you are after youtube videos when you say is there a DIY.
Thanks from 4cmt68
bradp51 is offline  
Old Mar 12th 2016, 07:17 PM   #9
Junior Member
 
Joined: Apr 2015
From: California

Posts: 7
Thanks: 0

i was able to get this done.

here is what i did:

1.remove clutch slave unit
2. remove the gear selector screw and move it up
3. remove the 2 screws on the front cover sprocket
4. remove the front sporcket
4cmt68 is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1199 > Ducati 899

Tags
front, replacing, sprocket



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Got the 14T front sprocket in and sag question..... Sergio1199Panigale Mechanical and Technical 23 Oct 2nd 2014 11:42 PM
Front sprocket to 14T Quadrupool Ducati 1199 43 Nov 4th 2013 12:26 PM
Front sprocket removal please Billy Mechanical and Technical 10 Sep 16th 2013 07:45 PM
DP 14T front sprocket Titaniumvalves Mechanical and Technical 16 Feb 5th 2013 07:18 PM
front and rear sprocket?? scuderiagmt Mechanical and Technical 1 Jun 23rd 2012 02:27 PM


Facebook Twitter Google+ RSS Feed