Go Back   Ducati Forum > Ducati Panigale Forum > Ducati 1299 > Ducati 959

Ducati 959 Ducati 959 Forum - Ducati 959 Panigale Superbike Motorcycle Forum


Reply
 
LinkBack Thread Tools Display Modes
Old Aug 9th 2017, 06:05 AM   #1
Junior Member
 
Joined: Aug 2017
From: italy

Posts: 23
Thanks: 0

Akrapovic installation

I have bought a used 959 akrapovic kit and i would like to mount it.
Is there someone that has fitted itself the akra terminals?
Is there any guide or instruction manual?
I was able to find only that of 899/1199 but that of 959 nothing.

Thank you
giusemanuel is offline  
 
Old Aug 9th 2017, 06:34 AM   #2
Phl
Moderator
 
Phl's Avatar
 
Joined: Feb 2012
From: here

Posts: 7,031
Thanks: 3668

I Ride: Panigale, CRF450, FZR400, GROM
it is pretty much the same, except the clamp on between the headers and the exhaust can.



do it!
Phl is offline  
Old Aug 9th 2017, 07:13 AM   #3
Junior Member
 
Joined: Aug 2017
From: italy

Posts: 23
Thanks: 0

Can the ecu going on error?. By removing the valve to terminal can the ecu go into protection status?
giusemanuel is offline  
Old Aug 9th 2017, 07:24 AM   #4
Senior Member
 
Joined: Mar 2016
From: NorCal

Posts: 615
Thanks: 176

I Ride: Panigale R, 1098R, 996S
Originally Posted by giusemanuel View Post
Can the ecu going on error?. By removing the valve to terminal can the ecu go into protection status?
there is no check engine light or anything that would put the bike into a protection or limp mode status, so you're good to go.

If you do a search, someone has found the correct plug to cover up that plug if you don't want to leave it exposed.

Also, at the end, remember to wipe down the pipes of all your finger prints or oil residue on your gloves. Once you start it up, it's going to stain the pipes
timwu12 is offline  
Old Aug 9th 2017, 07:41 AM   #5
Junior Member
 
Joined: Aug 2017
From: italy

Posts: 23
Thanks: 0

Originally Posted by timwu12 View Post
there is no check engine light or anything that would put the bike into a protection or limp mode status, so you're good to go.



If you do a search, someone has found the correct plug to cover up that plug if you don't want to leave it exposed.



Also, at the end, remember to wipe down the pipes of all your finger prints or oil residue on your gloves. Once you start it up, it's going to stain the pipes

Ok, many thanks for the clarifications.
Is this the plug?


Can i load myself the map of upmap?


Inviato dal mio iPhone utilizzando Tapatalk
giusemanuel is offline  
Old Aug 9th 2017, 08:52 AM   #6
Phl
Moderator
 
Phl's Avatar
 
Joined: Feb 2012
From: here

Posts: 7,031
Thanks: 3668

I Ride: Panigale, CRF450, FZR400, GROM




google 3 seconds
Phl is offline  
Old Aug 9th 2017, 09:25 AM   #7
Junior Member
 
Joined: Aug 2017
From: italy

Posts: 23
Thanks: 0

I already saw this visdeo, but the load of map for 959 is perhaps different and is it necessary ducati service.
Is this anyone that do this work itself?


Inviato dal mio iPhone utilizzando Tapatalk
giusemanuel is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati 1299 > Ducati 959

Tags
akrapovic, installation



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Installation of belly pan Styler Mechanical and Technical 12 Sep 26th 2017 10:37 AM
Ducati 1199s Akrapovic Exhaust installation and servo motor and butterfly valve??? shin Ducati 1199 2 May 4th 2016 01:21 PM
NIX 30 installation gwland88 Ducati 1199 3 Jan 7th 2014 10:26 PM
DDA + GPS Installation ? jock39racer Ducati 1199 6 Nov 4th 2013 02:58 PM
GPS Installation Stw Mechanical and Technical 41 Sep 16th 2013 11:44 AM


Facebook Twitter Google+ RSS Feed