Go Back   Ducati Forum > Ducati Forum > Ducati Superbikes

Ducati Superbikes Ducati Superbikes Forum


Thanks Tree3Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Sep 12th 2015, 08:59 AM   #1
Senior Member
 
Tdj8508's Avatar
 
Joined: May 2015
From: North Carolina

Posts: 130
Thanks: 16

Handlebar ends

What size Allen wrench is needed to get bar ends off?

Last edited by Tdj8508; Sep 12th 2015 at 09:22 AM. Reason: Bar ends
Tdj8508 is offline  
 
Old Sep 12th 2015, 09:15 AM   #2
Senior Member
 
Claymore's Avatar
 
Joined: Sep 2012
From: South Africa

Posts: 1,329
Thanks: 501

I Ride: Ducati Panigale S Tricolore
Lol.
Thanks from 990Glen
Claymore is offline  
Old Sep 12th 2015, 10:30 AM   #3
Member
 
Joined: May 2014
From: Michigan

Posts: 50
Thanks: 21

12mm
EnigmaRR is offline  
Old Sep 12th 2015, 10:38 AM   #4
Senior Member
 
Tdj8508's Avatar
 
Joined: May 2015
From: North Carolina

Posts: 130
Thanks: 16

Ty
Tdj8508 is offline  
Old Sep 12th 2015, 11:02 AM   #5
Senior Member
 
Joined: Sep 2013
From: Chicago, IL

Posts: 1,049
Thanks: 232

I think you need some Torx Allen for them. It's what I used.

I'll check and chime back in.
BadBoyBeltran is offline  
Old Sep 12th 2015, 11:06 AM   #6
Senior Member
 
flobrandx's Avatar
 
Joined: Jun 2012
From: PNW

Posts: 2,820
Thanks: 1326

I Ride: 2010 RSV4 Factory (Track), Paul Smart LE, 1199 Panigale S Tricolore (SOLD)
Im not at home to check what I used but I thought it was a torx T55 or T60 torx or you can use a 12mm allen like Enigma said above.

Last edited by flobrandx; Sep 12th 2015 at 11:12 AM.
flobrandx is online now  
Old Sep 12th 2015, 05:03 PM   #7
Senior Member
 
Tdj8508's Avatar
 
Joined: May 2015
From: North Carolina

Posts: 130
Thanks: 16

I bought both and these things are in. Maybe previous owner used locktight
Tdj8508 is offline  
Old Sep 12th 2015, 06:22 PM   #8
Senior Member
 
Joined: Aug 2014
From: Midwest

Posts: 716
Thanks: 217

The factory uses Locktite. Just hit it with a heat gun.
bp7178 is offline  
Old Sep 12th 2015, 09:05 PM   #9
Senior Member
 
Tdj8508's Avatar
 
Joined: May 2015
From: North Carolina

Posts: 130
Thanks: 16

The heat gun won't affect the plastic throttle? I'm hesitant on right side especially.
Tdj8508 is offline  
Old Sep 12th 2015, 09:39 PM   #10
Senior Member
 
Joined: Aug 2014
From: Midwest

Posts: 716
Thanks: 217

Direct the heat at the bar end not the grip. I ended up using a large allen socket which required me to use a 1/2" drive ratchet.

Believe it or not, an impact driver can be of benefit, but heat is your best choice.
Thanks from Gecko
bp7178 is offline  
Reply

  Ducati Forum > Ducati Forum > Ducati Superbikes

Tags
ends, handlebar



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Thoughts on a slightly higher handlebar position 1stduc1199 Ducati 1199 13 Apr 20th 2015 12:12 PM
what diameter are the clip ons / handlebar tubes Phl Mechanical and Technical 2 Sep 28th 2013 08:27 PM
Size of torx bit for Handlebar end 1stduc1199 Ducati 1199 34 Dec 15th 2012 04:20 AM
Different Handlebar Grips Xbox Ducati 1199 9 Jun 11th 2012 02:06 PM
Handlebar vibration Titaniumvalves Ducati 1199 0 Apr 27th 2012 06:15 PM


Facebook Twitter Google+ RSS Feed