Go Back   Ducati Forum > Ducati Panigale Forum > Ducati V4

Ducati V4 Ducati Panigale V4 Forum - Ducati V4 Panigale Superbike Motorcycle Forum


Thanks Tree1Thanks
  • 1 Post By Samba636
Reply
 
LinkBack Thread Tools Display Modes
Old Oct 25th 2019, 09:03 PM   #1
Junior Member
 
Joined: Aug 2019
From: Houston

Posts: 15
Thanks: 1

I Ride: V4S
Clutch Cover Install

Have bent the first drive plate on the V4 clutch.

Would appreciate guidance with the following

1. Can plates be purchased individually as opposed to the complete pack?
2. If I replace all the plates do they have to be orientated in any way?
3. How does the final/top plate orientate / install, any pics, I think its located in a different slot?
4. Should I load up the pressure plate with the top four clutch plates before installing (seen this advised on a youtube installation, again how should the last plate be orientated though?

Freakin Campisi video, tighen the bolts it will pull itself in......
Samba636 is offline  
 
Old Oct 29th 2019, 11:37 AM   #2
Junior Member
 
Joined: Aug 2019
From: Houston

Posts: 15
Thanks: 1

I Ride: V4S
Fixed it and to answer my own question...

To answer my own question and help any others with a similar issue

1. Can plates be purchased individually as opposed to the complete pack?
Dealer wanted to sell plates as complete pack, had to obtain one by other means.

2. If I replace all the plates do they have to be orientated in any way?
I dont think there is any orientation.
3. How does the final/top plate orientate / install, any pics, I think its located in a different slot?
Nope installed sam as others
4. Should I load up the pressure plate with the top four clutch plates before installing (seen this advised on a youtube installation, again how should the last plate be orientated though?
Again no specific orientation, loading up pressure plate with first four clutch plates helps a lot. As the bike is on its sidestand I used a thin thread to tie all the plates together then pushed it back in place, once plates were in I cut and pulled out thread.

Freakin Campisi video, tighen the bolts it will pull itself in......[/QUOTE]
Thanks from RobP69
Samba636 is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Ducati V4

Tags
clutch, cover, install, installing, plates



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Ducabike clear clutch cover, and clutch housing? Any issue with Galvanic corrosion? OrzO Ducati 1299 4 Sep 13th 2016 01:42 PM
Ducabike clear clutch cover install? DarkNight Mechanical and Technical 3 Jan 2nd 2016 05:10 AM
1199 R GB Case Cover and clutch carbon cover nvetro Ducati 1199 5 Dec 14th 2014 03:24 PM
How to install the clutch cover? Scorpio66 Ducati 1199 29 Aug 19th 2014 08:36 PM
For Sale: DP generator cover, DP clutch cover, 1199 base wheels, evotech tail tidy Illicitus Classifieds 3 Jun 25th 2014 09:44 AM


Facebook Twitter Google+ RSS Feed