Go Back   Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Thanks Tree14Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Sep 9th 2016, 09:31 PM   #21
Senior Member
 
Joined: Jul 2014
From: Papailoa Beach Hawaii

Posts: 349
Thanks: 51

I Ride: 2015 Ducati Panigale 1299S and 2016 Harley Davidson Breakout
I wished you guys would make detail videos on the installation it would help so much
Alpha Male is offline  
 
Old Jul 12th 2018, 08:31 PM   #22
Junior Member
 
Joined: Apr 2018
From: World

Posts: 8
Thanks: 1

Thanks for detailed explanation and installation instructions Vicious! Although your instructions for HIGH beams install, it is still great a guide.

I used your guide to install two (2) low beam DDM Tuning HID 35W 6000 H11 kits on my Panigale 1299. As I was replacing only 2 LOW BEAM lights, I was able to install it without removing headlight fairing assembly. Here are my Pani 1299 installation steps for HID low beams kit if anyone interested.

1. Remove IGNITION KEY PLASTIC COVER (4 screws). Remember which screws go where.
2. Remove left and right side fairings (see Vicious pictures 1-6). Remember which screws go where.
3. Remove top plastic cover on each side, refer to Vicious pictures #6)
4. Unplug existing two (2) H11 bulbs from each side
5. VERY carefully insert and secure 2 new HID light bulbs on each side. DO NOT TOUCH HID bulbs! Make sure they are secure.
6. Connect both HID kits. Make sure all connections are proper and secure.
7. Double check all connections once again.
8. Start the bike, both low beam lights should be on and working.

If lights are not working, double check your connections again. Make sure kits are properly plugged in.

9. At this point, both low beam HID kits should be working, and now you need to figure out the way to mount and hide ballast. To hide ballast on the LEFT side of the bike, I drilled 4 holes in side plastic, and used wire tighteners to secure ballast to the bike, then secured wires running to the left HID lightbulb.

10. Hiding ballast on the right side of the bike is more complicated, Panigales are complex racing machines, thus spare space limited. I drilled 6 small holes in plastic panel covering engine, and secured ballast there with 3 plastic wire tighteners.

11. Re-install plastic panels in the same sequence as they were removed, hide HID wires behind plastic panels.
12. Mount left and right fairings.
13. Install ignition key plastic cover.

All done!

Last edited by weber777; Jul 12th 2018 at 08:39 PM.
weber777 is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Tags
1199, ducati, hid, hids, install, panigale



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Can you install the LED headlights into Base 1199? southeastduc Mechanical and Technical 12 Jul 29th 2013 01:16 PM
JUST In case anyone over @ Ducati.ms saw my thread about a $600 parts install... White13Pani Ducati 1199 18 Jul 25th 2013 03:28 PM
BMW HP4 vs BMW S1000RR vs Ducati 1199 Panigale S vs Ducati 1199! Bojje Ducati 1199 33 Jan 13th 2013 05:25 PM
Ducati 1199 Panigale Svs KTM RC8 R pb0781 Ducati 1199 2 May 27th 2012 07:49 PM
1199 Video: Ducati explains the Ducati 1199 Panigale duc Ducati 1199 0 Nov 24th 2011 09:54 AM


Facebook Twitter Google+ RSS Feed