Go Back   Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Thanks Tree28Thanks
Reply
 
LinkBack Thread Tools Display Modes
Old Oct 13th 2018, 02:46 AM   #41
Junior Member
 
Joined: Jun 2016
From: UK

Posts: 25
Thanks: 1

Originally Posted by Doug916SP View Post
Your pics are not the 23.5 inserts, at least they don't look like mine. The holes are too close to being centered. I suspect they are the 1299 plates. With the 23.5, the shaft is moved Forward 5mm, both at the top and bottom to extend the wheelbase. If the hole at the top was 5mm forward and the lower was 5mm rearward, the rake would be like 14 degrees w/tire hitting the lower fairing!

Anyway my 23.5 part numbers are stamped on each piece. I don't plan to install them anyway as I'm satisfied with my 24 degree setup.

My 24 degree kit came from Jarel and was for the 899, I believe. That's where I got the part numbers.

Good luck with the project and let us know the progress.


I'l keep you posted ..

But take a look here , it explains it and the stamped part numbers are exactly the same as mine ;-)


1199R kit rake angle inserts
Spud312r is offline  
 
Reply

  Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Tags
degree, installing, kit, w or pics



Search tags for this page
Click on a term to search for related topics.
Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
24 degree head stock change Thamer Ducati 1199 13 Feb 8th 2015 06:57 PM
Help installing Rizoma rearsets kaido Ducati 1199 1 Nov 29th 2013 06:19 PM
first impressions upon installing TERMIS showerfan Ducati 1199 23 May 12th 2013 02:29 PM
Question about installing rear set SeanPatrick Mechanical and Technical 3 Mar 16th 2013 06:41 PM
Installing Termi Slips Stw Mechanical and Technical 9 Oct 18th 2012 02:13 PM


Facebook Twitter Google+ RSS Feed