Go Back   Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Mechanical and Technical Mechanical and technical topics, help, and discussions


Reply
 
LinkBack Thread Tools Display Modes
Old Sep 9th 2018, 11:09 AM   #1
Senior Member
 
Joined: Mar 2012
From: Cincinnati

Posts: 406
Thanks: 156

I Ride: 2012 1199
2012 1199 MAP sensors

Have an error on the horizontal MAP sensor, but I'll be damned if I can figure out where it is. Can anyone point me in the right direction? Don't really want to just start disassembling randomly.
ghostdog6 is offline  
 
Old Sep 9th 2018, 07:32 PM   #2
Junior Member
 
cyung0277's Avatar
 
Joined: Dec 2017
From: NH

Posts: 7
Thanks: 2

I Ride: Red 1199
Originally Posted by ghostdog6 View Post
Have an error on the horizontal MAP sensor, but I'll be damned if I can figure out where it is. Can anyone point me in the right direction? Don't really want to just start disassembling randomly.
The map sensors are located on the left side of the bike. Pop the top portion of the side fairing off and I believe the horizontal one is towards the back. Both are very easy to replace.



cyung0277 is offline  
Old Sep 9th 2018, 08:26 PM   #3
Senior Member
 
Joined: Mar 2012
From: Cincinnati

Posts: 406
Thanks: 156

I Ride: 2012 1199
Thank you! Looks like it will be pretty easy.
ghostdog6 is offline  
Old Sep 10th 2018, 04:10 AM   #4
Junior Member
 
cyung0277's Avatar
 
Joined: Dec 2017
From: NH

Posts: 7
Thanks: 2

I Ride: Red 1199
Just a pro tip on changing these:

loosen up the bolts that holds the panel to the body and it gives you sufficient room to get a hex (#5 if i recall) from the top on the front sensor and from the bottom on the back sensor. The back sensor is behind the panel from the picture posted (second pic). Patience is key to not drop the nut and hex bolt out. Took me 5 mins.
cyung0277 is offline  
Old Sep 10th 2018, 08:18 AM   #5
Senior Member
 
Joined: Mar 2012
From: Cincinnati

Posts: 406
Thanks: 156

I Ride: 2012 1199
Originally Posted by cyung0277 View Post
Just a pro tip on changing these:

loosen up the bolts that holds the panel to the body and it gives you sufficient room to get a hex (#5 if i recall) from the top on the front sensor and from the bottom on the back sensor. The back sensor is behind the panel from the picture posted (second pic). Patience is key to not drop the nut and hex bolt out. Took me 5 mins.
I was looking at it last night and was wondering the same, so thank you for the confirmation. Juuust a little more room will do it. Was hoping to not have to take the whole black side pod off.
ghostdog6 is offline  
Reply

  Ducati Forum > Ducati Panigale Forum > Mechanical and Technical

Tags
1199, 2012, map, sensors



Thread Tools
Display Modes


Similar Discussions
Thread Thread Starter Forum Replies Last Post
Location of MAP and TPS Sensors Jester305 Ducati 1199 1 May 21st 2018 10:01 AM
Turn off 02 sensors in stock ECU Ljuice26 Mechanical and Technical 17 Jul 21st 2017 04:20 PM
Oem map sensors: cheaper alternative? tteitei Ducati 1199 1 Jul 18th 2017 02:13 AM
Want To Buy: I need 02 sensors! zohsix01 Classifieds 2 Apr 22nd 2015 05:12 PM
Gear Sensors Error kaido Ducati 1199 4 Aug 31st 2014 12:08 PM


Facebook Twitter Google+ RSS Feed