SOLD! 15R / Part out /Complete front end (FGR301, GP4 RR brakes, Brembo GP MC, RME triples, FastFrank Axles, SBK quick release brake lines, and more)

Hello folks.
So there is somewhat strong indication that I may move overseas for few years...just my luck when I worked so hard making my R perfect.

Since this could take some time, I wanted to test the water and see if anyone looking for super high-end items.

I have few options here.

1. Sell the entire bike as is with extra spares (Highligts) - looking at $33000 OBO
+ Clean title in hand
+ 2900 miles total (about 900 miles since engine rebuild)
+ SL engine SBK/Corse internal (205whp) AND SBK R refresh kit (this is almost another new engine). Kit alone is worth more than £26,000.00 ($33,500!!!!) if purchased individually. So basically getting a free engine.
+ Rapidbike (~1000 + and accessories)
+ STM Dry clutch
+ Will include SBK complete new refresh kit with the bike (almost a another engine)
+ WSBK Corse Rearsets (~3500)
+ SL ti spring
+ llmberg carbon fairings (black)
+ Armorbody fairings (grey)
+ Mag wheels
+ MAC Race radiator
+ WSBK term race exhaust
+ Jet prime fuel velocity stacks for fuel injectors
+ Carbon evo comp fairing stay

2. Complete part out (of course major parts being sold first)
- Engine $12,000 with SBK Complete new refresh kit with STM Dry clutch. That's almost 2 engines. OBO
- Engine $8,000 and SBK Superstock R kit for $5000
- Complete front end - 18,000
- Clean title 15R frame - 5000 OBO
- STM Dry Clutch - 2000
- WSBK Termi Exhaust - 3000
- WSBK Corse Rearsets - 2000
- Ilmberger carbon fiber race fairings (2500) - 1500
- Carbon evo comp fairing stay (500) - 350


Below not priced yet------------
Sprint filter p16 ($300)
Chain 520 conversion DID evr3
Corsa quick change setup with afam rear sprocket
Afam superlight front sprocket
Cnc racing clutch slave cylinder (230)
Jet prime fuel velocity stacks for fuel injectors (800)
Ride height adjuster from desmo veloce (400)
Carbon clip ons (150)
Carbon evo comp fairing stay (500) x 2

Tank extension kit- carbon seat and carbon extension (600)
Ducati performance fuel cap (200)
Titanium valves added to motor (1200) parts alone
Corsa carbon race belly pan (800)
Termi evo 4 race exhaust real titanium (5800)
Ohlins ttx gp (900)
Titanium spring (800)


3. Trade +$ for Stock 15+ R items to bring it back to Stock R and sell that

It's quite a bit, so it will take time to build the post. Few pics below.

Complete Front End Below:
This is about $24,000 new. I'm looking at around $18,000 with all spares.
I will consider 15+ R Front end as part of the trade +$.

Ohlins FGR 301 Forks (13.3k) - Just serviced by Ohlins with receipt
Brembo GP MC complete (2K)
RCS 16 (clutch) complete (300)
GP4 RR Nickel with Z04 pads (1800+200)- just completely refreshed with receipt
Woodcraft clip on clamps (150)
Woodcraft bars x 2 set (100) (1 new 1 used)
Woodcraft bar clamps for reservoirs
Carbon bars x 2 set (150 each)(1 new 1 used)
Corse Racing Custom Quick Disconnect Brake lines (900)
FGR 301 Custom Front super light axle (~850)
FastFrank Custom axle x 2 (1 Gold New and 1 Blue cup) (450 each) --- Fast wheel change setup.
FastFrank Spacers x 2 sets (1 set new) (50 each)
Robby Moto Triples clamp for FGR (1000)
Apex Racing Switches brake and clutch side (~500)
Mag Wheels (~3500)
HP Brembo Rotors (600)
Full Six Racing Mud Guard (higher for tire warmer)

Engine $12,000 with kit OBO
Kit separately for $5,500 OBO

1 engine + SBK R refresh kit included (almost a complete engine)
Kit alone is worth more than £26,000.00 ($33,500!!!!) if purchased individually.
WSBK Water pump installed (800)
STM Dry clutch kit (3k)
Jet prime fuel velocity stacks for fuel injectors (800)
Sprint Filter P16 (300)

Genuine Ducati Corse Motor Refresh Kit (1199R Panigale Superstock)

This kit has been created by Ducati Corse for the recommended maintenance of the 1199R engine when used in Superstock racing, other similar race series' or even regular track usage.
This kit includes everything that is needed to keep the motor in a reliable state and deliver optimal performance.
The kit contents is extensive, but some of the key parts are listed below:

• Crankcase set, inc water pump
• Complete piston set (matched to included rings and liners)
• Cylinder liners
• Cylinder head set (100% control)
• Intake and exhaust valve set
• Valve collett set
• Range of valve shims
• Exhaust camshafts
• Titanium connecting rod set
• Complete set of opening and closing rocker arms
• Cam chains, tensioners and guides
• Water pump gear set
• Head gaskets and valve cover gaskets
• Clutch assembly, inc plate set and racing springs
• Starter motor
• Clutch side casing
• Driven gears 1st to 4th
• Selector forks
• Selection of main bearing shells (100% control)
• Selection of connecting rod bearing shells (100% control)

The parts which are subject to 100% control have been through a higher level of quality control to ensure their suitability to race use.

This kit has a total value of £26,000.00.

reserved

reserved

Good bike good dude and hope it all sells Yonger

Mick1976 said:

Good bike good dude and hope it all sells Yonger

Click to expand...

Thanks Mick. If it doesn’t, not too worried. Just keeping her. That’s what I planned all along. Can use forks and wheels on other project as well in the future.

I’d be interested in a few of the items if you decided to do a full part out.

Post or message me so I have idea what you’re looking at. Thanks!

looks amazing.. that dry clutch though ..

I'd be interested in the calipers and lines, dependent on price.

Wow youngR!!! That is a serious looking piece of kit!!! Good luck with the sale my friend.

I'm looking for an 1199/1299 Bottom Triple clamp, Steering Damper + end-die; rear brake master cylinder end-die +bolt.

1. Ohlins steering damper with end-die. The end-die is the piece that screws on to the end of the steering damper's shaft, where it connects to the right handlebar.
2. End die (and bolt) that attaches to the end of the rear brake master cylinder's shaft. To clarify, the end-die enables connection to the foot-peg lever.
3. Lower triple clamp or aftermarket replacement (or an adjustable triple clamp from an R model).

Please let me know if you have any of these parts for sale. I like to know more about the triple clamps.
Thank you,

Are calipers still available and if so, are you interested in selling them.

Looking for the RCS 16 clutch if you still have it.


Sent from my iPhone using Tapatalk

hi, id be interessted in the chain drive kit, the termi wsbk exhaust, the carbon fairing set and potentially the mag wheels