200/60 on 1299 rear

Ducati Forum

Help Support Ducati Forum:

Joined
Sep 9, 2016
Messages
16
Location
Johannesburg
Guy, neaded new tyres so put the 200/60 on the rear.

Problem, I use tyre warmers which is fine before hitting the track as the exhaust is cold but after and before the next session the exhaust is hot and I see there is minimal space to put the warmer back on without touching the exhaust. Anyone else experience this ?

I usually put the warmers back on immediately to keep temp in the tyre and not let it got through a hot cold cycle.
 
Have not ridden her yet.

Fit seems fine though there is enough space.

Just an issue to put warmers on against a hot exhaust.
 
Still stock front and rear sprockets.
Hey elbow dragger, !!! Feels good hey .
I set my 1299 with a 40 rear cog and an extra link in the chain and can still get adjustment. An extra link with the 39 the chain is to loose. This pulls the wheel back enough when ruining 200's. Meant running :)
4-5 sessions at Phillip Island on SC1's ....ruined .
The xtra link helps load the front (good) and kills some of the wheelie stuff while getting out of the corners.
 
Hey elbow dragger, !!! Feels good hey .
I set my 1299 with a 40 rear cog and an extra link in the chain and can still get adjustment. An extra link with the 39 the chain is to loose. This pulls the wheel back enough when ruining 200's. Meant running :)
4-5 sessions at Phillip Island on SC1's ....ruined .
The xtra link helps load the front (good) and kills some of the wheelie stuff while getting out of the corners.

Cool thanks for this !!! Gonna give it a try :) !!

Yes dragging that elbow feels great. Fist time I did get a bit of a shock even though I was trying !
 
change front to a 14 and rear to a 41 moved wheel back and left some for adjustment. all good now with enough space.
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top