2022 Panigale V4S: Issue with UpMap, Error Warning and Ride Mode Selection

So I recently upgraded my 2020 V4S to a 2022 V4S. The 2020 was running perfectly, but a buddy of mine sold me his 2022 at a price I couldn't refuse; hence, I sold the 2020 and upgraded to the 2022. Like I did for the 2020, I bought a Temignoni slip on kit, which came with the exhaust and upmap device. I installed the Termignoni and flashed the ECU with the correct map with DB killer. Now, I have the green arrow light flashing on the dashboard as though I've turned on the hazard light, and it won't go off unless I turn off the engine. More importantly, I am not being able to change the ride mode or enter the settings menu. I reinstalled the OEM map but same issue...hazard lights are flashing and I am not being able to change anything on the dashboard. I took it out for a shot ride hoping that would solve the problem, but that didn't work. Any ideas? I'm getting a sinking feeling and looking for potential solutions.

Make sure the connector to the left clip on controls is fully seated.

OMG! That was it! Thank you!!!!

It got me more than once. Make sure there is one of those rubber ties attaching it to the clutch line so it stays seated.

I have another related question. When I turn on the ignition, it does not show "race pro" on the dashboard. However, I did get a positive confirmation after completing the installation procedure even though there were a couple of hiccups. Now I'm wondering whether the ECU was properly flashed. Should the dashboard show "race pro" when turned on for a 2022 Panigale V4S? If it doesn't, is there any other way to confirm that the upmap was properly installed?

Unfortunately the 2022 does not show Race Pro on the dash with the Termi up-map. If you have no errors you should be good to go.

It may show Race Evo if you get the upgraded DTC software from the dealer but that's another matter.

bp_SFV4 said:

Unfortunately the 2022 does not show Race Pro on the dash with the Termi up-map. If you have no errors you should be good to go.

It may show Race Evo if you get the upgraded DTC software from the dealer but that's another matter.

Click to expand...

Many thanks for the reassurance.

bp_SFV4 said:

Make sure the connector to the left clip on controls is fully seated.

Click to expand...

I might have same issue. What left clip on controls?