2022 V4 fairing removal

Ducati Forum

Help Support Ducati Forum:

Joined
Jan 11, 2022
Messages
49
Location
Ontario, Canada
Hi Guys,
New owner here. Looking to install frame slider and would like to ask for some easy steps/how-to on removing the side fairing.

Regards,
Danny
 
There's also a service manual on here somewhere (for slightly older models, but probs similar) that have fairly detailed graphics and instructions.
 
Couldn’t find fairing removal from the pdfs. I have removed all the upper fairing’s screws but something is holding it inside around encircled part. Tried to pull it but too attached. I Might break the fairing.
 

Attachments

  • 2FF56315-9056-4FF9-BC40-9C44AA58414B.jpeg
    2FF56315-9056-4FF9-BC40-9C44AA58414B.jpeg
    473 KB
This is what’s holding it. Feels like square shaped thing
 

Attachments

  • 04CD5392-D8F0-4B2E-AE94-BC20340C9547.jpeg
    04CD5392-D8F0-4B2E-AE94-BC20340C9547.jpeg
    289.6 KB
It’s a rubber grommet you can gently wiggle it out


Sent from my iPhone using Tapatalk
I was pulling it but wouldn’t come out. The bike is even wiggling already. I’ll try to wiggle it instead thanks
 
It’s a rubber grommet fitted to the fairing. It sits over a metal stud which is mounted to the bike.

Working only with the lower part of the upper fairing, grab the fairing with your left fingers just to the left of where you circled, put your thumb on the frame and pop it off.

There another stud and grommet on the upper portion of the upper fairing. But for that you’ll have to pull up slightly.

The upper fairings also have a screw on the underside of the nose you’ll have to take off. I think you need to take the left upper fairing off first because of how the two parts line up on the nose screw.
 
It’s a rubber grommet fitted to the fairing. It sits over a metal stud which is mounted to the bike.

Working only with the lower part of the upper fairing, grab the fairing with your left fingers just to the left of where you circled, put your thumb on the frame and pop it off.

There another stud and grommet on the upper portion of the upper fairing. But for that you’ll have to pull up slightly.

The upper fairings also have a screw on the underside of the nose you’ll have to take off. I think you need to take the left upper fairing off first because of how the two parts line up on the nose screw.
Thanks I will take another shot. Just need to loosen the fairing above the clutch to install the frame slider.
 
here is the link for the 4s Models, I actually was looking for the same for a 2021
https://www.dropbox.com/s/8qt2gwzls...232713Z-001.zip?dl=0&file_subpath=/V4S+MANUAL

That's the copy @nealeo originally posted 3 years ago in this thread: panigale v4 service manual. This link is still working.
Here's another copy in case you can't find what you need: panigale v4 service manual

Since most online V4 workshop manual copies (only) contain the OFFline service manual pages in different orderings and a few copies contain some (bot not all) of the ONline (only) support pages regularly updated by Ducati.

@duc @Phl The search function of this forum seems disfunctional/ impaired? You can't find any of these earlier threads.
Not even by simply seaching for: "v4" + "manual".
Strange. :(
 
Clear cover with frame slider
 

Attachments

  • 27F80F5A-DEDD-46E0-9B16-1A6A46D379C4.jpeg
    27F80F5A-DEDD-46E0-9B16-1A6A46D379C4.jpeg
    169.1 KB
I was pulling it but wouldn’t come out. The bike is even wiggling already. I’ll try to wiggle it instead thanks
There is this little tab on the frame, you have to unhook the fairing by pulling the fairing up, before you can pull it off
 

Attachments

  • plug2.jpg
    plug2.jpg
    99.3 KB
  • plug1.jpg
    plug1.jpg
    142.2 KB

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Back
Top