AIM Race Render - Adding a DTC/DWC Bar?

Ducati Forum

Help Support Ducati Forum:

Kev242

Kev242

Joined
Dec 13, 2018
Messages
427
Location
Upstate New York
Anyone clever enough to know how to link a bar in RaceRender to DTC/DWC intervention? The data exists on the channels the Solo2 pulls and would love to add that visual, once @12k hits the dash lights up like a Xmas tree with all the aids kicking in. I'm fine delving through the data from the Solo2 but a bar would be interesting. I see how to add a bar but the link function only shows some generic channels (temp etc.) not the details the Solo2 captures even though I have the ECU linked.

Screenshot 2022-11-15 at 12.16.42 PM.png
 
1668534416783.png


In the configuration of the Solo2DL you need to assign the marked ECU channels to SC channels like shown in the picture. Then you can pick gauges in the data overlay and assign head and exhaust temp to them to display the torque reductions applied by DTC and DWC.
 
Excellent! Was stuck on the naming of the channel but I see how I can keep the name and just remap the function.
 
I can confirm that this process works just fine, although I should just call them Slow Torque and Fast Torque instead of WC and TC:
1668541798073.png
 
@WyldCFH It is pretty slick system, nice not to hit any buttons, just start and go! I am going to put some tape over the mic slot, a lot of wind noise at the moment, but other than that it has been flawless.
 
The mic is just a series of holes on the edge of the "receiver" for lack of better words. The way mine is oriented the mic is facing right into the wind and anything over 70mph becomes an awful white noise.

We were finding a hard spot to mount it within the bike, but this is my temporary solution....that I am feeling may be permanent. No room in the tail, none in the nose, and a fear that anything in the fairings is gonna roast!

They do have an input for a higher quality mic that can be mounted anywhere you please.

IMG_3354.jpegIMG_3360.jpeg
 
Kev242 said:
@WyldCFH It is pretty slick system, nice not to hit any buttons, just start and go! I am going to put some tape over the mic slot, a lot of wind noise at the moment, but other than that it has been flawless.
Click to expand...

How long have you had yours?

I ordered one from HSBK in February and am being told they’re still back ordered.
 
The Solo2 for a few years, the camera I ordered from Pegasus last winter but eventually canceled it due to availability, my dealership ordered it last spring and had it for me by April. Never got around to installing on my R so just popped on the V4 this fall. I hear they are damn hard to find.

Not sure if the dealership can still get them quickly (they got my '23 V4 base out of a crate basically as they were announced!) but try Teddy at Hudson Valley Motors 914-762-2722, a straight shooting parts guy.
 
Kev242 said:
The Solo2 for a few years, the camera I ordered from Pegasus last winter but eventually canceled it due to availability, my dealership ordered it last spring and had it for me by April. Never got around to installing on my R so just popped on the V4 this fall. I hear they are damn hard to find.

Not sure if the dealership can still get them quickly (they got my '23 V4 base out of a crate basically as they were announced!) but try Teddy at Hudson Valley Motors 914-762-2722, a straight shooting parts guy.
Click to expand...

Complicating my situation, I ordered it from the scammer Cycler (Aaron) so now I can’t cancel the order with HSBK because they won’t refund my payment because it came through Aaron.
 
Oh noes! That sux, sorry to hear that, they aren't cheap! I sent a text to Teddy, will update when they respond.

EDIT: I heard back and they would have to special order them and Aim has been very slow to fulfill their special orders....sorry man : (
 
Last edited:
Sometime next year AIM will be releasing an updated 1080p 60fps version of the bullet cam platform, including a dual camera version. Might not be a bad idea to wait until it comes out, even if that means getting a used older camera for cheap.
 
wortdog said:
Sometime next year AIM will be releasing an updated 1080p 60fps version of the bullet cam platform, including a dual camera version. Might not be a bad idea to wait until it comes out, even if that means getting a used older camera for cheap.
Click to expand...

I just found out that the Smarty Cam 3 is available now too.
 
craig bush said:
Complicating my situation, I ordered it from the scammer Cycler (Aaron) so now I can’t cancel the order with HSBK because they won’t refund my payment because it came through Aaron.
Click to expand...

Yup Aaron Beller scammed me too. Back then he did good business but not he just scams people for over bucks.

Still owes me an Exhaust for R1M & Akra Headers for a BMW.
 
Anyone using a Solo2 connected to the ECU ever loose the ability for it to wake and charge? Mind started to do that after a firmware update....not sure if I am chasing down fuse gremlins or some other function.
 

Similar threads

Phl
  • Sticky
suspension 101
2
Replies
20
Views
15K
rja4z3
rja4z3

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top