Akrapovic installation

Ducati Forum

Help Support Ducati Forum:

Joined
Aug 9, 2017
Messages
38
Location
italy
I have bought a used 959 akrapovic kit and i would like to mount it.
Is there someone that has fitted itself the akra terminals?
Is there any guide or instruction manual?
I was able to find only that of 899/1199 but that of 959 nothing.

Thank you
 
it is pretty much the same, except the clamp on between the headers and the exhaust can.



do it!
 
Can the ecu going on error?. By removing the valve to terminal can the ecu go into protection status?
 
Can the ecu going on error?. By removing the valve to terminal can the ecu go into protection status?

there is no check engine light or anything that would put the bike into a protection or limp mode status, so you're good to go.

If you do a search, someone has found the correct plug to cover up that plug if you don't want to leave it exposed.

Also, at the end, remember to wipe down the pipes of all your finger prints or oil residue on your gloves. Once you start it up, it's going to stain the pipes
 
there is no check engine light or anything that would put the bike into a protection or limp mode status, so you're good to go.



If you do a search, someone has found the correct plug to cover up that plug if you don't want to leave it exposed.



Also, at the end, remember to wipe down the pipes of all your finger prints or oil residue on your gloves. Once you start it up, it's going to stain the pipes


Ok, many thanks for the clarifications.
Is this the plug?
02ae9e40b1c4769e3a25640dfff6816e.jpg


Can i load myself the map of upmap?


Inviato dal mio iPhone utilizzando Tapatalk
 
[youtube]Vx58fk-xAzc[/youtube]

[youtube]XDilwvuxmLg[/youtube]

google 3 seconds ;)
 
I already saw this visdeo, but the load of map for 959 is perhaps different and is it necessary ducati service.
Is this anyone that do this work itself?


Inviato dal mio iPhone utilizzando Tapatalk
 
Back
Top