- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Can someone with a 1299 Anniversario kindly take a pic of the carbon shark fin at the rear sprocket area as well as the underside of how the fin bolts to the swingarm?
Anniversario Help.
- Thread starter kozumasbullitt
- Start date
-
- Tags
- anniversario
Help Support Ducati Forum:
- Joined
- Aug 19, 2016
- Messages
- 601
- Location
- Canyon Country
Here ya go...
- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Thank you. Does your chain guide have a gap between the swingarm? On the 1299s, the guide bolts directly to the swingarm but the Anniversario puts the end of the guide over the fin. I picked up a fin but it seems to fit really funny compared to the stock plastic piece.Here ya go...
- Joined
- Aug 19, 2016
- Messages
- 601
- Location
- Canyon Country
Yes, there is a slight gap but nothing I would be concerned about...
- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Thanks. Something is off with mine so I will give it another go tomorrow.Yes, there is a slight gap but nothing I would be concerned about...
- Joined
- Aug 19, 2016
- Messages
- 601
- Location
- Canyon Country
Thanks brotha. 
Sent from my LG-H901 using Tapatalk
Sent from my LG-H901 using Tapatalk
- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Do you have pics? I ordered from the 17 Anniversario film and it fits way different than the stock fin. I almost feel as if the fin is way too close to the sprocket bolts.
- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Would it be possible for you to take a straight-on pic as well as an underside pic? I want to be sure I am not doing something wrong before I open the mounting holes up to give some positioning wiggle room.Not an Anniversario, but mine looks the same.
- Joined
- Jun 6, 2016
- Messages
- 97
- Location
- SF, Bay Area
Thanks everyone. I opened the mounting holes up a fraction to help mount the fin. Actually, the factory drilled holes were pretty rough and the top hole was more oval than round. After I cleaned the mounting holes up, everything seems to line up much better.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
