Help Support Ducati Forum:
- Joined
- Mar 24, 2012
- Messages
- 3,310
- Location
- NOVA
Big One!
Sure do brother. Its a 12mm allen which removes these heavy ass bar ends. I just checked it again now in garage for ya!
Sure do brother. Its a 12mm allen which removes these heavy ass bar ends. I just checked it again now in garage for ya!
- Joined
- Mar 24, 2012
- Messages
- 3,310
- Location
- NOVA
FYI I would disagree with what tool is intended to be used here.
See this thread. http://ducati1199.com/ducati-1199/1020-bar-end-torque-bit-size.html
I too used a 12pt triple square socket bit, size 14mm to remove this. I'm glad a 12mm allen fits too. Last guy in that thread, at the time of my read, agrees with you allen guys
Whats interesting is that some of you agree its a 6 point socket on the bar end. While that might be true, on my bike its a 12 point socket.
So interestingly, it may be allen for some of you and 12pt triple square for others.
If you disagree, please post pictures of your bar end and corresponding tool
See this thread. http://ducati1199.com/ducati-1199/1020-bar-end-torque-bit-size.html
I too used a 12pt triple square socket bit, size 14mm to remove this. I'm glad a 12mm allen fits too. Last guy in that thread, at the time of my read, agrees with you allen guys
Whats interesting is that some of you agree its a 6 point socket on the bar end. While that might be true, on my bike its a 12 point socket.
So interestingly, it may be allen for some of you and 12pt triple square for others.
If you disagree, please post pictures of your bar end and corresponding tool
- Joined
- Mar 24, 2012
- Messages
- 3,310
- Location
- NOVA
Taking pics of both bar end and tool now. I see where you have a point (no pun)
- Joined
- Mar 24, 2012
- Messages
- 3,310
- Location
- NOVA
Torx & Allen
After reading over the post by CoolJam I went out and looked at these items again. It appears as if EITHER tool would work! What you see here are pics of :
-bar end
-end of 12mm allen socket tool
-fit of them together (it is tight fit, not crooked as it appears in pic
-metric 12mm on side of allen socket
I suppose that we both are correct although I have no idea how many points the torx bit has on it since I do not have one that large.
Hope this helps someone?
Ps. If you ever have issues getting your attachment to upload, just go in and add it a second time, hit upload and it pops right in. No waiting for this kid!
After reading over the post by CoolJam I went out and looked at these items again. It appears as if EITHER tool would work! What you see here are pics of :
-bar end
-end of 12mm allen socket tool
-fit of them together (it is tight fit, not crooked as it appears in pic
-metric 12mm on side of allen socket
I suppose that we both are correct although I have no idea how many points the torx bit has on it since I do not have one that large.
Hope this helps someone?
Ps. If you ever have issues getting your attachment to upload, just go in and add it a second time, hit upload and it pops right in. No waiting for this kid!
Attachments
- Joined
- Mar 28, 2015
- Messages
- 962
- Location
- Australia
Just make sure to use a impact gun as the tubing can be damaged inside the handlebar clamp.
If you stupidly use a breaker bar
If you stupidly use a breaker bar
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
