wow,what an awesome idea,looks cool.
www bike tower de Zentralständer Ducati 1199 Panigale - YouTube
www bike tower de Zentralständer Ducati 1199 Panigale - YouTube
Help Support Ducati Forum:
- Joined
- Mar 31, 2012
- Messages
- 157
- Location
- Upstate New York
Funny. That ´s the bike I did the test drive on. 
Bad thing about that tower: The website says you need to cut a hole into the cover
the hole is covered.
I don ´t know if I like that :/
And they are not the first who invented a stand like that:
google
Constands paddock
Bursig paddock racing stands
Bad thing about that tower: The website says you need to cut a hole into the cover
I don ´t know if I like that :/
And they are not the first who invented a stand like that:
Constands paddock
Bursig paddock racing stands
- Joined
- Dec 27, 2011
- Messages
- 449
- Location
- Lone Tree CO
- Joined
- Mar 1, 2012
- Messages
- 298
- Location
- Paris, France
Why adapting your tool when you can cut the bike.
Deutsch-Qualität, like the BMW S1000RR...
Deutsch-Qualität, like the BMW S1000RR...
- Joined
- Dec 21, 2011
- Messages
- 137
- Location
- bavaria germany
no problem, thats what i did the last two winter with the bmw.
- Joined
- Mar 24, 2012
- Messages
- 347
- Location
- Carrollton, TX
I would love to have this stand if I could make a clean circular cut like the one in the photo. Not too keen on cutting on the fairings but this stand is pretty nice.
- Joined
- Mar 31, 2012
- Messages
- 157
- Location
- Upstate New York
- Joined
- Nov 14, 2011
- Messages
- 325
- Location
- Larkspur Co.
there's no way in hell, I'd cut the fairing for a stand.
And I'd pass if I found a used one for sale that had been cut.
And I'd pass if I found a used one for sale that had been cut.
- Joined
- Feb 12, 2012
- Messages
- 922
- Location
- Charleston, SC
I think the notch is pretty discrete and so, I'd do it...
what I wouldnt do is get that stand for almost $400, I can get a nice red table lift for that, which I'd utilize more often.
- Joined
- Dec 21, 2011
- Messages
- 117
- Location
- Chiang Rai, Thailand
The Bursig stand and the rest of the copies uh clones, have some good features and some limiting features
Pros
1. Guys with small workshops with limited space where you can position the bike conveniently in any direction.
2. Front forks and rear shock can be completely removed for servicing.
3. This is the perfect tool to conveniently set up sag: bike unloaded measurement, bike loaded weight, bike with rider loaded weight.
Cons
1. All the stands I have seen use the swingarm pin as the main anchor point. So you won't b able to remove the swingarm
2. The above is also true for the upper rear engine mount.
So with the two above, engine removal won't be possible and still have the stand in place, but in reality major work on your bike can be done to some extent.
3. Aftermarket rear sets may hit or interfere with your stand adaptor plate. Some people have gotten the plate milled with no loss of strength. The plate I know that was getting milled was bcausr of interference with the gear shifter.
All in all a great stand making capable a lot of easy chores on your bike. No the full Monty, but still good enough.
And yes, I do own an original Bursig stand for my 999S
Pros
1. Guys with small workshops with limited space where you can position the bike conveniently in any direction.
2. Front forks and rear shock can be completely removed for servicing.
3. This is the perfect tool to conveniently set up sag: bike unloaded measurement, bike loaded weight, bike with rider loaded weight.
Cons
1. All the stands I have seen use the swingarm pin as the main anchor point. So you won't b able to remove the swingarm
2. The above is also true for the upper rear engine mount.
So with the two above, engine removal won't be possible and still have the stand in place, but in reality major work on your bike can be done to some extent.
3. Aftermarket rear sets may hit or interfere with your stand adaptor plate. Some people have gotten the plate milled with no loss of strength. The plate I know that was getting milled was bcausr of interference with the gear shifter.
All in all a great stand making capable a lot of easy chores on your bike. No the full Monty, but still good enough.
And yes, I do own an original Bursig stand for my 999S
- Joined
- Jul 16, 2012
- Messages
- 198
- Location
- not your biz
Awesome, unfortunately after 4 days I sent a request for info no feedback yet.
being outside Europe we should be able to get it VAT free....simple question no answer.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
