- Joined
- Nov 18, 2011
- Messages
- 2,084
- Location
- Round the World on an 1199
Putting bike back to stock. I bought it for $300, will sell for $200 shipped:
photo (33) by AntiHero-X, on Flickr
From Ducati Omaha's Site:
BSD 2 button Start/Stop Switch Panigale
Suggest As Gift
Item #: BD-SW-2B-04
Price: $299.99
DESCRIPTION
Race-quality 2 button switch for Ducati 1199 Panigale race / road bike - Stop/Run & Start functions. Replaces the OEM RH switch housing and retains all the functions of the original, in a racing-quality switch housing.
These are professional-quality race switches from BSD with fully crimped connections, don't be fooled by immitations with cheap soldered connections. These switches are also IP67 waterproof with gold contacts, the same types of switches you'll find on MotoGP bikes! There are cheaper switches on the market, but none more reliable than these!
This switch set may be fitted to any Ducati 1199 Panigale, and are a required element when installing an aftermarket master cylinder due to clearance issues with the stock switch housing!
Two individual sealed switches are held in a machined aluminium enclosure offering high levels of crash protection as well as electrical integrity.
Functions are:
Upper - RED latching switch for Stop/Run
Lower - BLACK momentary switch (normally open) for starter
Supplied with 600mm of sleeved 24awg wire and bike specific connector.
Ultra slim body allows easy installation.
Each switch is custom engraved. The red button labeled Stop Run. The black button is labeled Start.
photo (33) by AntiHero-X, on FlickrFrom Ducati Omaha's Site:
BSD 2 button Start/Stop Switch Panigale
Suggest As Gift
Item #: BD-SW-2B-04
Price: $299.99
DESCRIPTION
Race-quality 2 button switch for Ducati 1199 Panigale race / road bike - Stop/Run & Start functions. Replaces the OEM RH switch housing and retains all the functions of the original, in a racing-quality switch housing.
These are professional-quality race switches from BSD with fully crimped connections, don't be fooled by immitations with cheap soldered connections. These switches are also IP67 waterproof with gold contacts, the same types of switches you'll find on MotoGP bikes! There are cheaper switches on the market, but none more reliable than these!
This switch set may be fitted to any Ducati 1199 Panigale, and are a required element when installing an aftermarket master cylinder due to clearance issues with the stock switch housing!
Two individual sealed switches are held in a machined aluminium enclosure offering high levels of crash protection as well as electrical integrity.
Functions are:
Upper - RED latching switch for Stop/Run
Lower - BLACK momentary switch (normally open) for starter
Supplied with 600mm of sleeved 24awg wire and bike specific connector.
Ultra slim body allows easy installation.
Each switch is custom engraved. The red button labeled Stop Run. The black button is labeled Start.
