Help Support Ducati Forum:
- Joined
- Jul 7, 2012
- Messages
- 638
- Location
- New York City
Massimo Cruciata of Cruciata fairings has them. Austin Racing should be able to supply them.
Cruciata > ACCESSORI
Cruciata > ACCESSORI
zvez
Retired
- Joined
- May 8, 2012
- Messages
- 2,364
- Location
- ga
Thanks for the link, I'm just wondering if anyone's done it. It should be fine as the female dzus are configured the same way as the female fittings on the 1199, so it should be a simple matter of taking one off and putting the other on.
With the exception of the fairly tough to get at ones (i.e. the fasteners by the rear sets and the fastener behind the fairing next to the clutch, etc)
- Joined
- Feb 11, 2012
- Messages
- 8,402
- Location
- here
yes, correct.
they have the clips for the bolts, if you install dzus, you need to drill the hole and bend the dzus clip on the wings to fix it but you will never get the fairings to sit flush because of the height of the dzus clip
they have the clips for the bolts, if you install dzus, you need to drill the hole and bend the dzus clip on the wings to fix it but you will never get the fairings to sit flush because of the height of the dzus clip
- Joined
- Oct 11, 2013
- Messages
- 83
- Location
- Chicago
I'd still like to switch to dzus fasteners, so much quicker than standard screws.
Anyone else found a way to make the upper fairing under tank fasteners work?
Doubt there is an option for the recessed lower fairing by the rearset or the top push on fastener by the upper radiator but I could live with those if the others could be swapped over.
If you've never had a bike with dzus fasteners I doubt you'd get why those of us who have are hankering after them for the Panigale.
It is an expensive indulgence to save 30 seconds screwing a retaining screw in or out but given the ends and financial outlay people go to in order to save seconds here or there on this forum it is a justified question.
Anyone else found a way to make the upper fairing under tank fasteners work?
Doubt there is an option for the recessed lower fairing by the rearset or the top push on fastener by the upper radiator but I could live with those if the others could be swapped over.
If you've never had a bike with dzus fasteners I doubt you'd get why those of us who have are hankering after them for the Panigale.
It is an expensive indulgence to save 30 seconds screwing a retaining screw in or out but given the ends and financial outlay people go to in order to save seconds here or there on this forum it is a justified question.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
