Help Support Ducati Forum:
- Joined
- Mar 24, 2012
- Messages
- 3,310
- Location
- NOVA
Ummm
Rogers- SCROLL DOWN - As Rhino stated "If you look right down the bottom of this page, it will show you a list of similar threads. I think it has been covered in one of those."
Ps. You spelled your State incorrectly, but am guessing you already knew that.
Rogers- SCROLL DOWN - As Rhino stated "If you look right down the bottom of this page, it will show you a list of similar threads. I think it has been covered in one of those."
Ps. You spelled your State incorrectly, but am guessing you already knew that.
- Joined
- Apr 30, 2012
- Messages
- 1
- Location
- usa
changing rear suspension F-P
Just changed link to P setting, its very simple with a couple of tricks, first I used two steel rods, 3/8 by 12 in., insert these as far as you can into frame holes in front of rear sets, use a rear stand to lift bike, put two jack stands under steel rods and carefully lower bike on rods (keep stands as close to bike as possible for stability). Remove the two allen fasteners and locking bolt on link, wind link out to next locking groove and re-assemble.
Just changed link to P setting, its very simple with a couple of tricks, first I used two steel rods, 3/8 by 12 in., insert these as far as you can into frame holes in front of rear sets, use a rear stand to lift bike, put two jack stands under steel rods and carefully lower bike on rods (keep stands as close to bike as possible for stability). Remove the two allen fasteners and locking bolt on link, wind link out to next locking groove and re-assemble.
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
