Help Support Ducati Forum:
- Joined
- Aug 9, 2012
- Messages
- 1,458
- Location
- California
Remove the Rear speed sensor, put the bike in 195hi, turn everything off (DTC, EBC, ABS) Let some air out of the rear it grips better on the dyno, make sure you don't tie the rear straps to tight if you use them. I found my rear end to be very light it was squirley on the Dyno so I had to strap it down. Do some run ins to get the bike hot and sit back and enjoy.
- Joined
- Nov 29, 2012
- Messages
- 315
- Location
- Florida
Have a fan blow at right side of lower fairing , gets really hot from the pipe and may melt otherwise
+1 on removing the rear speed sensor.
Had mine on the dyno few weeks ago and the tuner wasn't very happy with the results (had it in RACE mode with everything off), he made afew calls to his contacts in Italy, and they all recommended removing the rear sensor as it gives the best results on a dyno
Similar threads
Register CTA
Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.
Sign Up
