interior of race trailers

Ducati Forum

Help Support Ducati Forum:

Joined
Jul 9, 2013
Messages
94
Location
South Tampa
Just bought a new trailer for trackdays a few months ago. It's a 6x12 and looking to customize the interior. If any members have pics of their interiors, it would be cool to see them.

I'll be running for sure Pitbull TRS w/single and dual placement for my 1199R and R6 Trackbike
 
Here is my 6X12. I painted the interior gloss white to make it brighter and easy to clean. Then installed 12" tiles and finished off with an E-Track system. The E-Track has unlimited locations for tying down your bike and accessories such as generators, air compressors etc. You can even mount the track on the wall and clip on 2X4 retainers to install temporary shelves or maybe a work bench. If you're carrying 2 bikes, I suggest staggering their chocks so the bike on the right side doesn't block the front door, the handlebars don't interfere with each other and you can walk between the bikes easier.
 

Attachments

  • IMG_0076.jpg
    IMG_0076.jpg
    98.7 KB
  • IMG-20130728-00002.jpg
    IMG-20130728-00002.jpg
    98.3 KB
Last edited:
ok its a horrible picture and doesn't show half the trailer. BUT...
6x10 American hauler Vnose+1.5ft
Barndoor trailer
2 pitbull TRS
work table in the V front, holds 3000w genny, toolbox, warmers, gear under the table via cargobuckle self ratcheting straps.
on the walls are a self unit to hold 2 helmets in bags, 2 pairs of boots and the ramp
stands are held in place by Etrack/ cargobuckles
 
Here is my 6X12. I painted the interior gloss white to make it brighter and easy to clean. Then installed 12" tiles and finished off with an E-Track system. The E-Track has unlimited locations for tying down your bike and accessories such as generators, air compressors etc.

+1 on EZ-Track.

Used the system on a 7x16 when a friend and I were racing. 4 race bikes plus a couple of pit bikes and generators and tools and stands and....on and on and on.

EZ-Track makes it really convenient and quick to get bikes loaded/secured. Especially at the end of a long, hot weekend when you're tired and just want to get everything in and start a (long) drive home.
 
What material do you guys recommend to finish the walls with or just paint the wood?
 
mine was already finished with some sort of covering over the plywood... though honestly I wouldn't worry about it... same the 15-50 bucks on paint or 100-200 on a covering and use it towards track time and good gear/ tires/ gas. so on...
 

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top