Kriega US Drypack on a 1299?

Ducati Forum

Help Support Ducati Forum:

Slowdive2

Slowdive2

Joined
Jun 6, 2015
Messages
202
Location
Boston
I was tempted to buy this:

Panigale fit-kit - Kriega

...but it notes it's not for the 1299?

I assume someone has figured this out. Right now I have a couple of figure 8 straps under the seat, but I'm concerned b/c the only thing holding the seat on is 3 plastic tabs.
 
I recently bought this but it didn't fit properly, different configuration to the 1199, so I sent it back and bought the ducati tail bag.

Sent from my SM-G900I using Tapatalk
 
Ended up McGyver'ing my own with stuff I had lying around. Not much to work with back there.

Not perfect, but at least all the mount points are secured by a solid connection to the "frame". The front was straightforward, just used the standard straps supplied with the bag thru the seat strap mounts.

Had to get creative with the back. Cut off some scrap strapping, cut (melted) a 12mm hole and sandwiched between two washers thru that rear bolt. Given there is only one mount point I put in an aluminum bar to help mitigate the torsional load on the seat. Also used the figure 8 loop in lieu of the supplied straps.

May not be ideal, but at least my bag is secured to the bike's hard parts vs the seat.

KreigaMount.JPG
 
Last edited:
You can also use the aluminum-ended straps and put some extended bolts on securing them to the seat lock. Same as the 1199. I'd recommend running the rear-most strap under the seat, otherwise too much pressure will be placed on the flimsy tab holding the seat cover thing in place.
 
AntiHero said:
I'd recommend running the rear-most strap under the seat, otherwise too much pressure will be placed on the flimsy tab holding the seat cover thing in place.
Click to expand...

Do you mean under and around the entire tail section or under the pillion attachment? I assume the latter (vs the pillion cover attachment).

The pillion on this bike is really flimsy in general compared to other Duc's I've had. Even the mounting tabs (mating and receiving end) are all plastic. I would never put a human person on one.
 
Last edited:

Similar threads

S
  • Locked
SOLD! 2017 1299 base - COMPLETE PART OUT
2
Replies
36
Views
1K
SirJAG
S
rja4z3
For Sale V4 Akrapovic (Underbelly) Exhaust, V-Twin Termignoni D175 Reparto Corse
Replies
6
Views
616
rja4z3
rja4z3
S
Idle gear (plastic) and primary sprocket failure – 2017 1299 Pani
2
Replies
20
Views
1K
baggerman
B
Vicati
For Sale Panigale 1299s and Panigale 959 Full bolt ons
Replies
11
Views
535
Vicati
Vicati
M
  • Locked
SOLD! 1299 Aftermarket Tri-Color Complete Fairing Kit $200+ Shipping
Replies
0
Views
300
MdDuc
M

Register CTA

Register on Ducati Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Back
Top