Received the k-factory tool today. Pins are correct but overall diameter is too small
[ATTACH=full]56223[/ATTACH]
Ohlins PN 00797-08 is the tool for FGR124 (43mm) forks. I think the FGRT has a different top cap (silver) although the forks are the same as V4R oem (blue)
[ATTACH=full]56224[/ATTACH]
The plastic shim doesn't allow it clear the preload hex. Removing the shim let's the tool sit further but it seems the pins are .5mm to 1mm too tight. Pins won't fully engage
[ATTACH=full]56225[/ATTACH]
This spanner was referred by Ohlins, but doesn't fit
[ATTACH=full]56226[/ATTACH]
[ATTACH=full]56227[/ATTACH]
What I'm going to try next is the 00797-08 version that GB Motorcycles makes, found them on ebay. I've also reached out to K-Factory to see if they can make the same multi-pin tool in the first photo, just slightly larger in diameter
