OZ wheel question

jmhamilton68 · Oct 18, 2020

This may sound silly to some of you, but I’ve never used after market wheels and this is my first Ducati.
I’m selling my race R6 and I’m setting up a second set of wheels for my V4. The track set will be the OZ piega with Brembo T-drive rotors. Other than the rotors and phonic wheel for the front, do I need any other parts? Will the rear just mount up without our changing the sprocket?

Bicster1299 · Oct 18, 2020

The rear will mount up without changing the sprocket.
As for the front. Are the Brembo T-drive rotors the same size as the OE rotors? If not you may well need shims for the front brake caliper mounts so the rotors dont touch the caliper or the pads only partially come into contact with the rotors. Also you may need bearings to go with the new front wheel

MaverickiB · Oct 18, 2020

When I ordered OZ GASS RS-A wheels from Bellissimoto, the front came with a set of spacers and bearings already installed.

Desmolvr · Oct 18, 2020

You will need the sensor ring for the electronics. Most after market wheels come with ready to go but you may also want to extra spacers.

jmhamilton68 · Oct 18, 2020

Bicster1299 said:
The rear will mount up without changing the sprocket.
As for the front. Are the Brembo T-drive rotors the same size as the OE rotors? If not you may well need shims for the front brake caliper mounts so the rotors dont touch the caliper or the pads only partially come into contact with the rotors. Also you may need bearings to go with the new front wheel

Thanks. I got the same size as OEM on the T Drives so I should be good. Thanks for the heads up!

OZ wheel question

Help Support Ducati Forum:

jmhamilton68

Bicster1299

MaverickiB

Desmolvr

jmhamilton68

Similar threads

Register CTA

Recent Discussions