Servo Exhaust Eliminator

Hello, I'm happy to find this website looking around for aftermarket parts for my Ducati. Before I purchased my SF V2, I looked at a Panigale V2 but I went with the SF. I rode Yamahas since 2004 and my last bike was the R1. Ever since Valentino Rossi rode the Ducati, I wanted one as well and finally, I'm here. Anyways, I've installed an Arrow exhaust and servo exhaust eliminator from Motomillion, however, the CEL is always there. I've tried clearing the code using an OBD2 but the code keeps coming back. I took the cable off the servo motor and installed the motor back on the bike, but the CEL is still there and stubbornly always comes back as well after resetting with the OBD2. I thought the servo exhaust eliminator was faulty, but I guess not and I don't know what's the problem. So, now I just ordered the Upmap tune and it will be arriving soon to see if it will work. I'm just worried about not having a servo eliminator and when I have to bring the SF to the dealer for the 600mile service the CEL will come back when I take the tune off. Any recommendations, thoughts advice? Thanks in advance. Codes: P048D and P0476

2022 Ducati Streetfighter V2
Update: Received the Upmap device and followed all instructions and was able to go as far as completing the BT pairing, then during the 'detecting vehicle model' it kicks out and goes back to the Upmap disclaimer page. Any help will be appreciated.

Update: Servo eliminator and Upmap are not compatible.

Check out Cali Motors YouTube install of Arrow and UpMap. He did not get a code on eliminating Servo with his installation.

I’m fairly confident that going with the UPMAP alone without the Servo Eliminator plugged in will resolve the issue

So without the Servo Eliminator, I’d try going back to the stock map with the servo motor plugged in as normal. Then once you’ve loaded up your new map via UPMap, the servo would be disabled already by that point and using the Servo Eliminator on top of that would be redundant. Although unplugging it after the UpMap is suggested, I didn’t notice a difference either way and had zero CELs thrown.

Plus, I’m sure someone will pick up the Servo Eliminator if you put it up for Sale.

Either way, hopefully you can get the issue sorted out quickly. Good luck!

Update: All is good now. I went with BTuning and the bike is good to go. Thanks.

Hi, just curious how many of you had Arrow Exhaust installed and had ECU error. I had mine installed to my 2021 V2, no error at first until i got an oil change at the dealer a month or two later. Not sure if I need to get the Brentuning to fix or if there are other steps to try first? Thank you in advance.

shiworld said:

Hi, just curious how many of you had Arrow Exhaust installed and had ECU error. I had mine installed to my 2021 V2, no error at first until i got an oil change at the dealer a month or two later. Not sure if I need to get the Brentuning to fix or if there are other steps to try first? Thank you in advance.

Click to expand...

Wonder if they reloaded factory map. No error on mine

shiworld said:

Hi, just curious how many of you had Arrow Exhaust installed and had ECU error. I had mine installed to my 2021 V2, no error at first until i got an oil change at the dealer a month or two later. Not sure if I need to get the Brentuning to fix or if there are other steps to try first? Thank you in advance.

Click to expand...

You'll either need a servo exhaust eliminator or flash the ecu. UpMap have limited map varies on type of bike and exhaust installed.

I have the upmap on mine but bought a servo elimanator. I'd sell it for half price if interested.