Turning bars to adjust lever position

Mcv4 · Mar 20, 2023

Ducati newbie question. I want to rotate my brake lever in particular down slightly and obviously the mc is located via pin to the bar. Can you undo the nut holding the bar to the clamp to rotate the position or does this have positive location as well? Do I just remove the pin between the mc and the bar?

B Topp · Mar 20, 2023

I just removed the pin for the MC. A pair of players, twist and pull.

SirJAG · Mar 21, 2023

you cannot just loosen the clamp on the bar, it is also PINNED! such a ...... design. Yes as B mentioned, just pull the pin out with plyers and make the adjustments you need. I rotated both sideds downward quite a bit, and had to then bend the reservoir bracket so it wont impact the fairings when full turned at the stops.

BP PanigaleV4S · Mar 21, 2023

I couldn’t pull the pins in mine out with pliers. I had to hit it with a cut-off tool.

Mcv4 · Mar 21, 2023

Cheers guys. Pretty crazy considering the type of bike. I'll attack that pin in the bar.

Turning bars to adjust lever position

Help Support Ducati Forum:

Mcv4

B Topp

SirJAG

BP PanigaleV4S

Mcv4

Similar threads

Register CTA

Recent Discussions