1098

Too many mods to list them all, but more or less the following: 1098 base- installed the entire Woodcraft catalog minus the bodywork, ohlins drop in suspension stuff, HID headlamps, Rick's mosfet R/R, manual fan toggle override, Radar, custom seat, Full Termi w/dyno tune by BMS. Panigale V4S-...

Found this beauty on Craigslist being sold by a friend of the previous owner. Sounds scary, but the previous owner passed away, RIP, and left no service history behind. The bike cleaned up nicely and is in showroom condition. This is my first Ducati, and I am looking forward to enjoying her for...

Hello, I recently purchased a 1098s tricolore and I'm wondering if anyone has changed the Termignoni silencers for the shorter versions (96198609B Exhaust System - Racing | Termignoni I like the look of the shorter ones better and wondering if it's a simple swap given that the tricolore comes...

Hi, Wondering if anyone has tried combining the SC Project CR-T end cans with Termingnoni headers on an 1098 or similar? Both have a 70mm diameter, so wondering if they are compatible. Thanks in advance, Greg

Hello everyone! I just purchased a 2007 Ducati 1098 with 10,500 miles on it. The previous owner never did the 7,500 mile service so I just did the 15,000 service with new belts, valve adjustment, the whole thing. There were 2 recalls on the bike so I took it to my local Ducati dealer to get it...

Hi, Does anyone happen to know the correct Pit-Bull front lift pin #/size to use on Nichols triple clamps for the Ducati 1098S? The "special" lift type used with the OEM triples before I swapped no longer fit. The hole diameter looks to be 14.5mm, but some pins on their site are angled, some...

Greetings fellow Ducati riders! I am the owner of a new 1098 that I recently purchased as a garage find. I've got a post up in the superbike thread about the experience. I have a 97 Valkyrie that I bought for leisure cruising and was not planning on another bike, but alas that is quite often...

Greetings fellow moto-nerds! Recently I heard through the grapevine that a friend of a friend had a couple of bikes they needed gone that had been sitting in a garage for many years. Being a bit of a moto-nerd, I ask for pics and behold that one of these bikes happened to be a 2008 Ducati...

Hi guys! I'm looking for a 1098S, 1098R or an 1198 engine. Unfortunately, I had a bit of trouble with mine and is now completely wrecked. Please help! Please don't hesitate to reply to this thread if you could assist me in any way! Thank you!

Purchased these for my bike then it sold prior to installing. Paid $150. Asking 110 shipped. These were for a 2007 Ducati 1098, Again- never used and just sat around. The seal is broken when I was moving garages but they were never installed. Brand New Located: Delray Beach, Fl 33444...

-Powder/ceramic coated Brembo brake calipers, chain guard and frame plugs -Full Termignoni Exhaust. -Racing ECU and Tune. -Ohlins full suspension Upgrade -Fully service with New oil, fluids, brand new tires -Upgraded 1098 suede seat -Scorpion Alarm system with remote -Adjustable Brembo Clutch...

Just bought a 1098 off a good friend. After he transported it down we noticed a small oil leak. He swears this is a new development and I believe him. After I run the bike in my garage for 10 mins I don't see a drop... but when I pulled in after a 10 min ride it dropped about a water worth...

What's a good battery tender for a 1098 S (2011). That won't cost 100 bucks... saw some on amazon for 80+ but wasn't sure if there were better alternates.

Hello all, new owner of a 2011 1098 S. Quite a speed upgrade from my multistrada. Have a few questions I will post in the proper area about correct battery tender and a leak that just started... more to come!

Hey guys! A few days ago i got myself a 08 1098 only 21,000k's on the clock a full service history and it is beautiful!! I have noticed this more so at night but the LCD back light and head light cut out for a second then they are back on. I checked the voltage of the battery on the bike and...

This is the base 1098 but has $2500 in ohlins suspension and several other extras- Work done by Moto Corse Performance in South Florida. Bike was just serviced - have over $2,000 in receipt for it. 11,200 miles. -Powder/ceramic coated Brembo brake calipers, chain guard and frame...

Hey guys, So I've been banging my head against the wall trying to fix voltage crapping out on my 1098. I changed stator and regulator (2 of them) and my bike always starts fine, no issues there and voltage shows as 14V. But once the bike gets warm, it drops to 13, then 12.5-12.2 and as low as...

This is a like new Sargent Seat. I tried it on my 1098 S for about 40 miles, and it just wasn't for me. This is the main seat with the rear seat cover. The seat looks brand new. The rear seat cover was never even opened. $300 shipped.

I searched the forums and I found several threads on torque, but I could not find a thread specifically asking what my issue is. I have a 07 1098 S. I recently replaced the clutch pressure plate with the rizoma star pressure plate. If I tighten down the clutch pressure plate bolts to 5 Nm, as...

this a set of carbon black mamba bst, good shape no damage, as is they fit a 1098, there some other spacers i need to machine so they will fit a panigale, which i can do or you can buy them, here...