1199r

Ok here's the situation. I've had a 959 for about 5 years. I loved it. Did a few mods including the full Akra system. But technically it was the 899/1199 Akra full system, as opposed to the "Ducati Performance" system for the 959/1299; but since the 959 took the same exhaust, I put it on my...

I have a (almost) perfect 2014 1199R fuel tank. This was purchased for a road bike rebuild project but I decided to track the bike and so this tank is way too good for that. If interested, have a look at the photos and contact me. I'm happy to post anywhere at the buyers expense. 2500AUD -...

Got the Blip Box pro from Ducati Omaha. The CAN connector on the left side doesn’t match up. Anyone else have this issue? Specified “R” at checkout so not sure what the deal is. The bike is equipped with an 8pin connector and the blip box shipped with a 4pin.

HI Guys, Im wondering if anyone here can shed any light on a problem that has started recently on my Panigale 1199 R 2013. The bike will not exceed 5000 rpm in any gear or eve in neutral, its just like there's a rev limiter on there like a pit lane limiter. It bounces off the revs just like...

Good day. I did some searching on past threads and didn't see anything pertinent... I need some help sussing out a problem: I am the second owner of a '14 1199R (3200 miles). I picked it up yesterday, rode it about 5 miles and stopped to check it over. When I looked at the clutch window, the...

Hi guys, I need some desmo help (lol)!!! I bought a practically new (800 mls) 01 Panigale 1199R crankshaft with the Pankl titanium connecting rods, the question is, I have a 1299 and this bike blew the engine (destroyed crankshaft and connecting rods), my 1199R crank + Pankl titanium rods...

Hi guys, I need some desmo help (lol)!!! I bought a practically new (800 mls) 01 Panigale 1199R crankshaft with the Pankl titanium connecting rods, the question is, I have a 1299 and this bike blew the engine (destroyed crankshaft and connecting rods), my 1199R crank + Pankl titanium rods...

i am looking to upgrade my 2013 1199r to the higher end ohline suspension. Currently i have the factory electronic stuff but want to go to their high end mechanical suspension. Anyone converted this before? anyone know if the ECU has to be flashed or can I just unplug the old stuff and go about...

Selling my 2013 Ducati Pani R This is THE 2013 Ducati 1199R.* Odometer reads 3,1xx miles as you can see in pictures.* This bike is fitted with a Clear Bra all around!* More accessories just to name a few:* Rizoma rear sets, Rapid Bike Module, Akropovic Full System exhaust -* Marchesini forged...

Hi folks, I'm eyeing a rare offer for a 1199R brand new. As such it's quite a lot of money but the bike looks to be stellar kept: http://bit.ly/2lqCP6z For 25k is this a good deal or not? Is this more of a collectable or a track monster that should be used for it's purpose? Also, is...

Well - wasnt my fault but here is the story- Running my second day in expert class - was on turn 15 right on Apex `90MPH area. nothing but the grass to the right of me. I see a white bike - im down slidding look up, dude looks behind him keeps riding. The dent in the tank is from my arm...

For sale We are selling one of our spare 2014 1199R motors. Motor only has 100 miles on it. Please see pictures below. Will provide cell number for serious buyers with any questions. Requesting $5000. Best Regards, Blade

Last night i was finally able to start getting the 1199r ready for CCS racing. My first round is not until August, but i wanted to make sure i did not run into any hang ups before the flag drops. Last night we were able to get the front fairing fitted, as well as the lower fairings...

Good morning everyone, I wanted to know if there was a quick fix - a trick - or a part needed. I am prepping the bike for racing over the next couple of days and wanted to know someone had some insight onto what needed to be done. Your insight is very much welcomed Thanks !! :D:D

Please help! My 2013 1199R has been shutting off while I'm riding. I have read several threads about this issue, but other than suggestions I haven't come across any solutions. If you know how this issue can be resolved please advise! Thank you.

So all i have to say is thank god for quality parts from Woodcraft Technologies. If you are going to run your pretty bikes at the track the minimal you should do is invest in some good protection. My bar ends, rear sets and front axle slider took the brunt of the hit. I was cooking...

Meeting with photographer to get these in prints for the garage!

So, after breaking the engine in (560) miles I was finally able to take this beast to the track. First run out was to feel the bike out and get a better feel for its chassis, suspension and brakes. I placed the rear sets on their highest setting for maximum clearance so it has the best chance...

Hello, I wanted to see what else everyone here is doing to protect their bikes on the track. I have placed Woodcraft bar ends and clutch and brake guards. Woodcraft rear sets, front end axle sliders and clutch cover. I have also removed the mirrors and placed the mirror block offs on...

So ive been on a parts purchsing/track crack bemge getting ready for the new season. Last season I traded my 959 in for a brand new leftover 1199r, yes a virgin! Last Friday I started out with planning out my tires for the season. I found a Supercorsa SP in northern Scotland for $242. With...