aftermarket

Rotobox Boost wheels w/ceramic bearings $2500.00 They were mounted and removed after 17kms Cause I sold the bike. 2. Ohlins 203 forks, sprung for my weight 198 lbs. Built by Kyle racing. $1000.00 3. Ohlins TXX36 w/hydraulic preload, built by Ducati Omaha $800.00 4. Shoei MM Helmet brand new...

Good Afternoon, My name is Alec i'm from New Zealand, Never Rode an Ducati before but brought an Ducati Monster 797 and is hella in love with it.. but i am facing an small issue, i have installed an Aftermarket Exhaust Akrapovic Exhaust, when i take out the baffle and go for a ride, some...

Hi, First post here, I have a 2017 1299, unfortunately had a little slide into the weeds that resulted in damage to the fairings- one side is pretty totalled. Looking at the OEM prices and my insurance excess, just wondered if anyone has had any joy with the cheap versions of ali-express or...

Ok, question about the Ohlins steering damper for the base model. It comes with a spacer that sits between the push rod bearing and the clipons. Is there any purpose for this spacer?? Using it causes my damper to sit cockeye. It works fine but just annoys me so I removed it and it’s perfect...

Do we have anything like the ytrac system on the Yamaha? I had an R1M before my 1299s. Did my first track day on Friday and was thinking about how much I would have like to have ytrac. I was getting a lot of activation on the electronics light but as I made adjustments I really couldn't pinpoint...

Hello, I'm new to the Ducati world, is there any reliable website where you guys buy your OEM and aftermarket parts? I'm looking for the low Fairing to Set the race exhaust and the brakes side mirror.... Sent from my iPhone using Tapatalk

Hello, I just bought a V4S and I also purchase the Akrapovic exhaust but I didn't installed yet because my bike only have 60 miles. I just saw the new Termignoni exhaust and I really like it. I wouldn't mind to sell my new Akrapovic and buy the Termignoni however according to Ducati I...

Are there any aftermarket subframes that fit all the factory panels and parts? I would like to be able to switch from the cowl and seat every now and then for a passenger and tail bags.

Does any company make mirrors that will fit our 1299's. At this point I dont care if they have turn signals built in. I hate moving the inside mirror around to see is instead of moving the whole housing like on other bikes or aftermarket mirrors that i have on my s1000r and s1000rr

Some of you might have installed an alternative QS shifter. A good product for the Panigales with Blipper function is made by TransLogic UK. Please check EndoDoc's thread http://ducati1299.com/ducati-1299/26116-new-translogic-shifter-1299-finally-pics.html Unfortunately this shifter comes with...

Looking for a used 1299 Exhaust setup or a used/damaged aftermarket full exhaust set. Let me know. Thanks

I purchase a stock akra exhaust and wanted to know if there is any real difference between the one that came off an 1199 R and the one you can buy online. Also is there anything else that i will need to make it work with a 2013 1199 S.

Hey guys I'm in the market for a new set of rotor. Any suggestion? Front and back. Just want to get as many suggestion as possible before making a purchase. Sent from my iPhone using Tapatalk

Anyone using something other than the stock clutch pack, EVR, Barnett, Duca Bike etc (specifically friction discs)? Opinions?

Now that the build debacle is over it brings up a good question which is, did the company you bought your bike from deliver what you wanted. A decent way to access that would be to look at what you spent on changing your bike to better suit your liking. I found the SL argument interesting. I...

The exhaust valve at the outlet of the headers for noise control(?), what's the consensus? Remove it or leave it as is with the spring holding it open? Anyone tested it both ways with dyno charts showing the differences? Personally I see it as an obstruction that should be removed.

Has anyone tried a strain gauge quickshifter on a 1299? would be interrested as I think the push button type sensor is kind of sloppy...

My 1199 is primarily for race use. My previous race bikes have all had aftermarket braided stainless lines, but they were all japanese bikes or supermoto conversions, so the upgrade was a no-brainer. Am I correct (albeit surprised) that the 1199's stock brake lines are not braided SS...

Hey All, Was wondering if anyone has used Galfer or Spiegler steel braided brake lines on the 1199/1299 or SL? And if so did you notice a difference on the track? Or any other brand. Thanks in advance..

Anyone fitted one yet and any positive feedback? My clutch hand is getting sore! Thinking about the Oberon and apparently the 1199 one fits the 1299 :)