bolt

Can anyone help me identify this bolt? It's a 75mm M6 (greased) with a point on the end. I have been working on the bike, installing some heat shielding inside the subframe and this fell out of seemingly nowhere. I have no recollection of having removed it and am wondering if it was loose and...

Can anyone recommend the torque setting for the bolts on the brake calipers. My pads started squeeking at 3K miles and I need to check them.

My 2016 1299s is in the shop, and they're telling me that the "bolt on the counter shaft shift rod is seized" and it will take 2 labor hours to repair. And that this is "fairly common on these bolts due to the lock tight used by Ducati." This makes no sense to me. Has anyone experience this...

Removed the old crappy magnet and put a high power one on: Old:

Hello! this may be a rookie question but I’d rather ask and find out than do it and figure out that it doesn’t work, then redo things. I’m looking to change out banjo bolts at the clutch lever and front brake lever, they differ from each other in design. I have found replacement banjo...

While tightening down my clutch cover guard, thought the clicking sounds were from the torque wrench, set to 11nm. Nope, stripped the thread holes of the top 4 holes holding the clutch cover on. Felt like I barely applied any pressure. So now I’m faced with: Replacing the clutch housing...

I have recently bought a Constand and it requires removing the frame bolt and using a spacer - does anyone know what the torque setting is for the bolts please or where I can download something? :) I can't upload a picture but it's the bolt that is visible on the silver frame that some people...

Hi guys can someone tell me the torque setting for the bolt shown in the pic please? SEE HERE Many thanks :)

Hello All, I was out riding and after I stopped to get gas I was not able to shift up from 1st and cant find neutral, it was stiff like I had already reached 6th. I pulled over to inspect and found that the bolt holding the quickshifter was very loose and close to falling off. I hand tighten...

Besides just buying bolts pre-drilled anyone drill their own? Is it worth it? Any recommendations on brand of drill fixture & bits? Thanks

Hi Guys, I felt so defeated this weekend... I was trying to install my radiator guard I had purchased for my 1199 Panigale S and the 2.5mm hex screw came out with ease on one side and the other side has been stripped. I tried spraying WD40 on the bolt but no luck any suggestions? Also, I...

Last Tuesday I did an oil change for the first time myself and noticed the lower kickstand bolt was practically all the way out. Now I understood why the bike seemed unsteady when it was on the kickstand. Last year the kickstand was a loose and my buddy tightened. But this time the bolt was...

Didn't want to hijack the Gecko thread on the engine bolt purchase. I've been searching the site all morning regarding various suppliers of the titanium engine bolts and bits and pieces. A lot is old info and with missing images and links. Who have you had the best results with supplying...

Hi, I'd really appreciate if anyone has any shop recommendations within or near NYC to remove a sheared bolt. My bike is precious to me, so I'd like to go somewhere that has a good reputation. Thank you for any help! -Constantinos

Does anyone know what the size specs are for the 3 pressure plate bolts inside the clutch cover on a 2016 1299s? Thanks

CORSE DYNAMICS Titanium Rotor Bolt Kit: Ducati: 8X20 [Set Of 10] Price: $99.90 * CORSE DYNAMICS Titanium Rotor Bolt Kit For Ducati: 8X20 [Set Of 12] Price: $114.00 * CORSE DYNAMICS Titanium Rotor Bolt Kit For Ducati Scrambler: 8X20 [Set Of 5] Price: $49.95 * These ultra...

Banjo bolt brake switch M10X1.0 [Most Brembo] $21.95 These are great when installing aftermarket rearsets. Simply replace your banjo bolt on your rear master cylinder, then wire the switch to your to factory place. * FREE continental USA shipping on orders over $100. *...

Ti Clutch Slave Cylinder Bolt Kit $15.99 * Titanium bolt kit to replace the 3 steel bolts that mount the slave cylinder * FREE continental USA shipping on orders over $100. * One free re-ship for size exchange * We pay sales tax on Dainese * Outside continental USA, use shipping...

Holding the horn bracket?! It's even an 8.8. Cracks me up.

CORSE DYNAMICS Titanium Rotor Bolt Kit For Ducati: 8X20 [Set Of 10] Price: $95.00 * CORSE DYNAMICS Titanium Rotor Bolt Kit For Ducati: 8X20 [Set Of 12] Price: $114.00 * CORSE DYNAMICS Titanium Rotor Bolt Kit For Ducati Scrambler: 8X20 [Set Of 5] Price: $48.95 * These...