des

So I have seen many variations on the theme of this but have not yet run across this specific combo on the forums. I was riding, hit a bit of a bump, and the bike died one day with these three warning indicators. With these indicators the bike will not attempt to start. while I have never...

I read somewhere the dynamic suspension gives some support during acceleration But don't understand how to adjust this setting More toward GRIP? Or towards STABILITY I get a bit off headshacke under really hard acceleration I have fixed must of it by adding rear preload, but want to know...

Hi guys, i bought the 1299S 2016 and on the dashboard flashing error DES! I checked the wiring harness from the forks, the steering damper and the rear shock. I found damaged wires on the rear shock. I fixed them, but the error was still flasing. My friend has 1299S 2014, I borrowed a BBS to...

DES error light flashed on my bike along with many other lights.. quick shifter stopped working occasionally.. anyway., long month long story later., the ground cable from battery to the engine had a small crack.,(behind the battery) like i looked right at it and didnt see it small...

By chance, is anyone familiar with the Custom Fixed suspension setting? Is there a way to make that the default selection in race mode, and not have to re-select after each key cycle? Thanks

Just checking to see if anyone has experienced a DES error that clears it self as soon as it appears. 2015 1299S (everything stock) * 8 months ago i had the springs replaced front and rear. * I run the suspension in manual always * I replaced the fuse in slot 1 * I inspected and reconnected...

Hey guys, I need your help please :) I washed my 1299 S on Friday. Started it on Saturday morning - everything was fine. After a few kilometers motor turned offed. Displays shows 4 error codes: ABS, SCU, DES, ENGINE. I have absolutely no idea about technical things. I guess some...

Hi all, I know this has been brought up before but I haven't found any answers? How do you go about bypassing the DES on the rear shock..? I have manage to bypass the front forks with 16 ohm resistors which works a treat although does create a fair bit of heat in the resistors..! Surely...

Hi all, I know this has been brought up before but I haven't found any answers? How do you go about bypassing the DES on the rear shock..? I have manage to bypass the front forks with 16 ohm resistors which works a treat although does create a fair bit of heat in the resistors..! Surely...

Does anybody know what the Electronic Suspension defaults to in the event of a failure? On the connector that goes in the top of my right fork leg, the little snap/clip thing is broken (the little thing that pops into place on all of the electrical connectors to lock them in place). It...

Just wondering if anyone has tried the Dynamic settings on the suspension yet and if so, on what setting? I'm still running in ( see other thread ;) ) but going to swap over to dynamic settings and see how they feel. Just wondered if anyone else is trying it..

I'm just curious how I would delete the DES on my 1199S. I'm thinking about a suspension upgrade.

Just spoke to Kyle Racing in Cali. They said just upgrading the rear to manual will not throw an Error code on the dash. Apparently only the front will.Sounds like BS to me. Does that sound right to anyone that has done it? If it is true, then Mupo here I come. Thanks.

What must be done to remove the electronic suspension? Is it just simply swapping out different forks and shock, or will I get a .... load of error codes? Thanks.

Hey guys. This is gonna turn out to be a tuning question and I hope a certain tune can help me. Removed the electronic rear shock and now I get the DES error and CEL. Need to see if any tunes can flash out the rear DES because the dealership said they can't. Aside from this: I have...

Please can someone give me advice on how to remove the front DES caps/adjusters?? I have managed to unscrew with a 32mm socket but can't figure out how to remove the adjuster part from the cartridges??? Reason I'm removing them is because I'm rebuilding my 1199s after a huge high...

After a little over 400kms now I can defiantly say there is something off with the suspension settings on my R. Before delivery I had test driven a base model and it drove solid with perfect bound and rebound. It was on the F setting. I had the dealer set my R in P mode thinking it would...

During my change to the full Termi system, it required I unplug the two identical leads to the rear shock. Although the harness-side is labeled either compression or rebound, the shock-side of the connectors is not. There is a tiny yellow clip on the compression lead (shock side). Can anyone...

took the bike to work today, went to leave and start it, and got a check engine DES error when i turned the ignition on and before i started the engine. any fixes? bike had 156 miles on it '13 1199r

Forgive me (oalvarez) for going over old ground here but I've not been able to find a definitive answer. In relation to DES the 1199 Manulal says: "Note By increasing the click setting you decrease the hydraulic damping, by decreasing the click setting you increase the hydraulic damping."...