diy

Hi guys, just want to get some opinions out there, which it maybe relatively to how much experience a person has, like to get some genuine feedback if you had your exhaust done, would you recommend to do at dealership or DIY? Any comments or tips is appreciated

I have very limited working knowledge of high tech electronic systems. I would like to reduce or eliminate the low rpm, low load jerkiness and generally smooth out the power delivery on my 1299. I have been told the stock fuel map is optimised for emissions and to make you feel as if the bike...

The links below are for the 3D scans of mirror blockoffs that came with my R, They are in .stl format and in millimeters. You should be able to import into a 3d printer program, clean up some edges and print as many as you want. You will have to drill and tap the mounting holes, ABS and PLA...

The Sequential Tail Light Hi guys There were some posts here during the last months about sequential turn indicators (e.g. http://ducati1299.com/ducati-1199/20557-motodynamic-integrated-tail-light.html). The motodynamic light was never released, so I decided to build a tail light for myself...

Im halfway through doing this myself on my 1199. Does anyone care to have me do a step by step video when I adjust my horizontal cylinder? I will be starting on it next week. It will go over these steps: *)Tools needed 1)Check valve clearances at rest position 2)Setting the Piston at TDC...

Hi there I am looking to start changing my tires at home. Looking for advice for best tyre changing lube. thx.

Hey everybody, figured I'd share this little project of mine since it is finally complete (took a while for the solar panel to ship). If anyone is interested I will post the parts list. System is fully functional. I use extreme velcro to mount my phone to the triple clamps. This system runs...

was wondering if you guys did it yourself or took it to the dealership. How much did you guys end up spending on oil and filter vs. paying 2 bills at the shop for one?

Just bagged a spare exhaust so I can core it. Any tips before I get stuck in? Thanks in advance

I see plenty of threads saying how easy it is to bleed the clutch and how it solves the no neutral problem and constant engagement problem and I want to do it! Can someone point me to a thread that actually shows how to bleed the clutch. Everyone says it takes like 30 seconds but I still don't...

Since my dealer moved way out of the way, Im doing most things myself now. My "Dealer installed" Puig just cracked so a new Fabbri screen install is not the worth the aggravation of taking to dealer. Project completed with help of this video from carbon world...

My DIY fender eliminator/rear turn signals I utilized the stock mounting piece. I cut off the plate extension mount piece with a band saw. A Dremel or similar tool would work. I am still considering using some sandable epoxy to fill the piece from the inside and outside. That way I could sand...

Since warranty is over and due to time constraints it is a huge inconvenience for me to take her in for 7500 mile oil change So I decided to do it myself. After hearing about the Oil filter "cap" being a bitch I decided to loosen it first before draining the oil therefore if I can't remove it I...

My new Ohlins spring arrived today (thanks Jarel) and I was wondering how hard it would be to replace it myself. It LOOKS like it would be easy but... After the plan is to take it to the dealer to set sag. Thanks-

I just bought the rizoma rearsets to replace the stock rearsets - does anyone have a DIY for this ? I'm kinda nervous to work on the ducati - it looks complicated :p so if anyone can point me to a how to or give any tips it would be very helpful. Also I do need a little schooling on the...

Rizoma rear reservoir custom mod. I have the Rizoma front reservoirs. and I didn't love the rear that matches with the chrome bracket so I modded my rear to accommodate the matching Reservoir.Its a cleaner look with a shorter hose. A simple bracket, and With snips,I cut the plastic OEM res...

Does anyone have a DIY on the changing the windscreen on the 1199. Trying to put my larger windscreen on but this is looking confusing.

I gave up on waiting for the Austin single side dual outlet option with bellypan option and bought a brand new Termi slip on kit for $1,550.00. I've always done exhaust mods myself on all of my bikes. I opened the box last night and holy smokes are there a lot of bits. Maybe once I get going...

I have my own tire changer and have changed tires on previous bikes but never a Ducati. I have been doing a bit of research on it but I have come across some additional tools that I haven't needed before. Are these necessary for the job: -Front Axle Drift -Front Axle Alignment tool I...

Copied and pasted from another thread....... Originally Posted by DRSapp Thank you. Moderately Easy: 1. You'll need to unload the swing arm: a. Use a motorbike center lift or some similar or b. As I did: I. Zip tie the front brake on II. Locate some wood blocks or as I did ~ 17mm...