electrical

Fixing a ducati panigale 1199 2012 that was left out in the rain for several months and pretty abused in general. Had a BBS error light and sputtering/ throttle response problem even before it was left out. At customer request I'm attempting to fully repair the bike. Everything cosmetically and...

Was having starter issues related to the starter solenoid, changed it out and was having no issues on test rides around the neighborhood. First time i took it back through town i went to the bank, turned it off, deposited money, and when i came back out the bike was totally dead. No dash light...

I have been having issues with my 1199 since I bought it used with 7000 miles. I have put 500 miles on the bike, but it has been stressful. The electrical issues consisted of: BBS error Can error Pulsating dash Check engine light Gas light When starting the bike the starter will turn...

FINALLY back in stock! The Ducati OEM race bodywork kits for V4 Panigale, as well as the racing electrical plugs. We have just TWO sets of the bodywork and 10 sets of the plugs. Bodywork Kits are quite affordable at $798 and include upper, nose and tail fairings PLUS blanking plates for...

So this happened yesterday, please see pic attached. My 1299 S would not start. Powered up, but did not engage the starter. After hours and hours of investigative work, I found a wire on the bike side of a connector leading up to the Start/Stop button had separated from the back of the...

Hey all, I'm trying to find a source for these connectors - would any of you know where I can get them? They're used for the license plate light and the mirrors and possibly other locations that I've yet to take apart! Sent from my iPhone using Tapatalk

hi everyone I bought a bike with the front fairing ripped off and everything that goes with it the harness and dash were intact but no lights or anything else I went on Omaha parts and it doesn't lay out the exact things the electrical connecters go to does any one have an accurate wiring...

I have taken of the front fairing and have found this component stuck with velcro to the fairing !!! Anybody know what it is and where is should be screwed/located ?? The wires R/Y/Bk come from the loom on the left side (siting on bike) with the GPS wires

Can Someone please post some pictures as I can't figure out how to put my bike together

Had my 1299 about 6 weeks, rode it for 3 before it developed an electrical fault, gutted to say the least, bike keeps sending warning lights, battery, fuel engine management, abs. Hope it's sorted soon before the sun comes out. Anyone else had any problems ?

I received my connector kit from DucOmaha. Three plugs come with it. I installed to kickstand bypass plug already, but the rear subframe with harness is at my other shop today, so I'm not sure which of the other connectors is for the tail light, and have no idea what the 3rd plug is for. Anyone...

Got some issues, possibly electrical? -Right indicator doesn't work when engine has warmed up -Won't display Neutral when engine warmed up Taken to dealer who said the neutral switch needs replacing so they've ordered the required part from Ducati and will be done under warranty, they'll...

Hello. Would someone post a link of the part number and where is the best place to get the taillight connector for the Panigale. Thank you !!!

Hi guys Does anybody have the Tri schematics in a more or less high resolution as picture of PDF? Thanks very much.

Excuse me brother that has much Experience with Ducati 1199! I has wonder with many Capble that I don't understand, so I need your help. What is it on image bellow? And what important for use it? One more with another Cable What is it with this cable? And what important for use it brother...

Hi All, I have an unusual electrical issue on my 2013 Pani R I have replaced the tail light with the Competition Werkes integrated light. Everything works but the brake light only blinks once when I hit the brakes. No matter how long i hold the brakes in, it only blinks once initially...

During my change to the full Termi system, it required I unplug the two identical leads to the rear shock. Although the harness-side is labeled either compression or rebound, the shock-side of the connectors is not. There is a tiny yellow clip on the compression lead (shock side). Can anyone...

Anyone know where the easiest point is to attach to switched electrical ? I know the battery is along the left hand side and is easy enough to attach to but want to attach a lap timer that will turn off when the switch is turned off. Without tapping into a relay which is then spliced into...