fitment

Hey guys, I have a 2013 Panigale R and had a question about the way the mid fairing connects to the bottom fairing on the left side while on the bike. I noticed that the corner doesn't fit flush once I tighten up all the plastic bolts. All the clips are intact and seem to be in place. Is this...

Hey guys, I can't seem to quite remember how this plastic clip fits to the fairing stay. I remember clipping a zip tie but not sure how it goes back together....anyone have a pic?

Good Afternoon All - wondering if anyone out there has mounted up a DB Holders Subframe on their 1199. I did so recently and for some reason the stock seat doesn't fit correctly. The nose of the seat sits about an inch above the mounting point where the bolt would go through and attach...

Hi all, Does anyone have measurements of the hub and the brake caliper fitment? I'd really appreciate to find this data or to receive advice on where it can be purchased. Many thanks in advance, ele

I wonder out loud ... what is the problem with fitting your bike to your body and riding habits .I see posts asking about fitment of clip on handle bars with responses so RIDICULOUS ... it makes me wonder how so many can stomach the empty rhetoric proffered by the SO CALLED KNOWLEGABLE ??? NOT...

I'm having trouble finding an exact answer on this. Will the Upper Headlight Fairing (Nose) from a 12-13 generation fit on a 14-15 generation? I see them listed as separate some places then others say fits all years. Thanks.

Not sure if there is a rear ride height tool currently available for the 1299 (with -4mm fixed swingarm pivot height). If not, I hope this DIY will help 1299 owners wanting to use the CORSE DYNAMICS Panigale ride height tool. This tool, with the round delrin bushings, is manufactured for the...

I was wondering if anyone fit a woodcraft shark guard onto their 1199? I bought one for my GSXR, and if I recall, the directions said something along the lines of "they didn't work on SSA's or other swingarms without flat surfaces." But....my little plastic sprocket guard broke off recently...

Does anybody have an exploded drawing or a photo on how the washer and stuff should be arranged on the front of the side fairings? Mine looks like it's way too far in..

Hey guys, recently i was going to get the magnesium repainted as it had a few scratches, but due to the cost it was more economical to purchase the carbon fibre bracket. http://thumbs.ebaystatic.com/d/l225/m/mVGoFf_LpNd9jwhC0wChUPA.jpg however, upon fitting, it was really hard, i had...

Hi all! Just a quick question to those more knowledgable than I. Would a set of forged Marchesini's off a 2010 1198S fit on the ol' 1199R Panigale model year 2013? Thanks!

I installed the gas cap today but it seems off. It is not flush and one side seems higher than other. Anyone have this cap?

So I'm talking to a guy on CL about his scratched, new DP CD under seat exhaust shield for $40 and he is telling me that it is considerably larger than stock and may not fit. I thought they were all the same no?!?! Can someone explain what this guy might mean? It was damaged in shipping and he...

Hey all, I have a set of brand new Pirelli Supercorsa SP V2 for sale (OEM fitment - 120/70 front, 200/55 rear). Initially purchased this as a backup set a few months ago, but decided I will be going to DOTs the next time around. $420 takes the set. Local pickup only (Orange County)...

Hi guys, Am I right in thinking you can remove the small round plastic disc that covers the bottom of the headstock to accomodate a paddock stand?! If so,any ideas on what size pin fits it? Big thanks in advance :confused:

Hi guys, Im after a second set of wheels for tracking and was wondering if a set from an 848,1098 or 1198 will fit with no problems?! Thanks in advance :confused:

So, wanna get these wheels from a 1098/1198 on to the Pani as spares. I know I need front wheel spacers and only know of Dan Kyle having any. I went to his site and saw nothing... Anyone have any detailed info or selling a set? Thanks!!

I just traded in my 2006 999s for a 2012 1199 base model. The bike is amazing and I'm looking forward to doing plenty of trackdays on it this year. However, it looks like the front fender is so close to the tire, that it will be an extreamly tight fight for my Woodcraft tire warmers. In...

So who has fitted the aero kit to the nose cone? Is there a procedure to follow? Or what not to do? I was told it is sort of permanent once on as It would mark the fairing. Cheers

As i was looking at the 1199 gas cap i noticed that it looked like it could potentially be identical to the older models such as 1198/1098/848, holes alignment looked pretty close to me. Can anyone confirm if it fits?