forks

$1000 Ohlins forks off my 2010 Ducati 1198S. Serviced 8/29/24 with Ohlins fork oil 01309-01. Selling as I upgraded to FGRT210’s Stock springs installed. Will ship at buyers expense, PayPal G&S buyer pays 3% fee, or F&F accepted also. Located in Kansas, USA

Has anyone installed the Ohlins FKR 124 cartridges in the V4R NPX forks or know if it offers anything over the stock cartridges?

Hey there. Ok I'm building a custom race bike. I'm going to be using 1199s forks one it. Couple questions. First, if you wanted to go to manual cap adjustments what do the stepper motors caps do? Just spin rods all the way down in the fork as a manual would? I see people asking this similar...

I have a a panigale V4s I want to put more preload on the front fork I know I have to disconnect the electric wires But then, do I give it a few turns on both forks? Or just one? Sorry for the stupid question, but some were I saw there were some forks that you just adjust one for...

I'm looking to get some ohlins for my V4. Besides the machined fork bottoms on the FGRT 214, is there any difference between those and the oem ohlins forks that comes off the 15+ 1199r/ and 1299r FE? They both say they have NIX 30 internals. I sometimes see deals for used 1199r/1299r forks...

Hey guys, I picked up a mint 2012 Tricolore and noticed the triple clamps can't be slid down the fork tubes as their is varying taper differences form the stock mounting position- has anyone been able to lower the front and rear of this bike to reduce seat height? I was able to do this on a...

Good Morning guys, So i have a 959 that i will convert into a 1299 for the track. We have everything to do the swap but since the 959 doesnt have electronic suspension, and the harness we are have is a 1299s, i was wondering if there is any company preferally in the US that makes a...

Up for grabs is a set of 16R RT Ohlins forks off a 16R with less then 200 miles so very new condition. The internals and valving are identical to what in a set of FGRT forks or 30mm cartridge kit. Fork tube dimensions are top 53mm and bottom 58mm. $1400 shipped

Hi there guys, So recently I had somebody try setting up the suspension on my '13 1199.... Everything went fine until he was messing with the rebound. No rebound at all! Started doing some research and found out that is a common problem with the 1199 base (Marzocchi forks). He tried to...

Usually I would just swap out internals for either Ohlins or Mupo cartridge set up but have decided to re work the standard big piston Showa's . Guys here have had great results with these forks I have had mine re valved and a extra 10 mm travel added they respond well to this . Tracking the...

Can someone explain the difference between the Ohlins FGRT 203 and FG 424 forks. From I read both had the Nix 30 cartridges. But the price difference is a few hundred more for the FGRT 203

These forks have only 1400 Miles on them. They are Perfect

Would anyone be interested in my stock suspension. I'm upgrading to Ohlins Forks and a Ohlins shock. My stock suspension has maybe 1350 miles on it. If anyone needs these parts I'll give them a killer Deal

ohlins 30mm FGRT 203 forks 1,0 springs- 1400$ ohlins ttx 36 mk2 100 spring-750$ ( comes with 2 spanner wrench for ride height) They are off a 2013 1199 base and has about 9000 miles of street use with 2 track days. price are +pp fees and shipping

Going to be going with a different setup on my track project. Everything is 100% straight. Prices are shipped within the 48 states. Will ship worldwide at your cost. PayPal friends:family method or add 3% please. 1. OHLINS OEM S model forms, no issues no bends no wrecks, great condition...

Hello, Just wanted to find out if anybody is finding it hard to get a set of Ohlin FGRT203 folks? I ordered a set back in December last year and I am still waiting. The last work from the supplier is finally all parts have arrived in Sweden and ready for assembly. I am not holding my...

Ohlins front forks. 1199R fork tubes with nix 30 cartridges. Just been serviced, set up for 90kg rider. Have been crashed but all straight. Comes with triple clamp and clip on clamps to fit base or S 1199. Ohlins rear shock DU930 just been serviced. All in excellent used condition. $$SOLD$$

I'm looking to service my front forks, I've looked all over and can't find a manual or any information on the front forks of a base 1299. Does anyone have any idea where to find this information?

Just a feeler for now to see if there is any interest. I have figured out why the Marzocchi forks on the base loose their rebound. I have come up with a fix, and can also change the valving to give better rebound and compression. If there is enough interest to make it cost effective for myself...

New rules or?