front

Ive just commisioned a V4 base model for my track work. Still have my 1299, and i'm not adapting to well onto the V4. Have the Ohlins shock on the rear and had some shim work done to the stock Showa forks. Any opinions, recommendations for set up would be great .:rolleyes:

Hello all. I am going to relist my K-tech shock and forks with better pictures this weekend. Manly to show a bit more detail for what I am asking. Thank you for understanding. I relisted the rear K-tech here: http://ducatiforum.com/classifieds/39541-k-tech-rear-shock-85n-90n-spare-spring.html...

Hi all, I am having problems trying to use my front paddock stand, I was given a front & rear paddock stand when I bought the bike, the rear one works ok and is straight forward, the problem is with the front, when I offer it up to the front axle it will not take the weight and the left side...

$350 Ducati Performance Front and Rear Paddock Stands *Cover is sold*

Which do you recomend and were te get them For best performance on track and street

Howdy stupid Front Preload Question RE:: Is 6 turns equal to 6MM ? After discovering the plethora of Dave Moss videos - I'm trying to dial in my Front Fork Preload. The 1199 Base Manual says "Spring Preload - Fully Open(counter clockwise)6MM. I've read a few riders say stock was "6 turns...

Does anybody have the dimensions for this pin? I intend to machine one as nobody local carries it in stock and I'm impatient.

It's probably just me (in my head) but I believe the V4S lacks front tire feel. If you've performed a basic sag you'll know the spring rates on the stock 2018 V4S are completely unsorted (which I hope to address this winter). That being said, one way to get some additional feel is to lower the...

Hi and thanks for the add. I was hoping someone could answer this question. I have a Ducati 848 (2008) and did a rookie thing and left the disk lock on and tried to ride off. Stupid mistake but this have bent the disk rotor. My question. Do I need to replace both rotors and pads? Or just...

Very long story short: I dropped my bike in my garage and the front fairing got cracked. I have already purchased and installed a new OEM front fairing and now I'd simply like to sell this one to anybody who wants to fix it and have a spare. I need not tell you all how much these things are...

Hi, I recently trashed my front wheel speed sensor (ABS Light, Eng Light, yellow triangle, etc. now on). I used tire warmers on a track day and thought nothing of it when it kept getting snagged. As a result, the sensor wire came loose from under the fender and rubbed on my tire eventually...

Good day folks! I'm looking for the front nose fairing and possibly the right fairing for a 1199 Panigale Tri Colore. I suppose I'd do a full fairing set if need be. I know this is a wing and a prayer type of scenario, but, anybody out there with these??

Hi all, Has anyone measured the resistance, current or load of the OEM front turn signals? I'm performing an integrated turn signal in the headlight mod and sold my stock mirrors before I started this :( I will do a how-to post up when I'm finished so others can do this. I know a few others...

Can any Speciale owners please check their front sprockets. After an owner posted up an image on Facebook of their new Speciale, I was intrigued by the unusual looking front sprocket. After much digging around and him giving me the name of his Ducati dealer, they in turn told me that these...

Debating whether dropping the Ohlins Nix 30mm cartridge kit or the TTX cartridge kit into my 2015 1299. Any opinions on which riders like better. Depending on cost maybe even the full ohlins road and track nix front forks. But that would really determine on the Nix 30mm cartridge kit or TTX...

Hi all, I am attempting to install a set of LED strips into my 1199s headlight for turn signals. I purchased a set of HD strips from Diode Dynamics: https://www.diodedynamics.com/hd-led-amber-semi-flex-strip-single.html When running some tests before I open the headlight, I could not...

Hey guys, Anyone notice their front brakes on their 899/959 being soft/mushy. I have to pull the front brake lever all the way down just for brakes to bite. It can be a very scary feeling, especially when riding fast. I saw a thread on the 899 Forum...

As the title states, getting prepped for this season and the bike got a bit banged up during my move up north. Could also use a RapidBike Race but this is less urgent.

I know there has been a few threads about stands but I could not find the specific info. I see what looks to be a punch out location under the triple. Does it snap out or do you literally have to punch the tabs out to gain access? Also does anyone know the actual pin size for the triple?

Waiting for my V4R to come in next month which will be used for Racing only... My dilemma!! I just checked pit bull and it says their rear stands will not work with Tire warmers?? What is everyone using for a rear stand for racing and track riding then? Also does the new V4 able to use the front...