lever

Hi there, Selling an ASV Shorty Clutch Lever, model # BRC550S. It's in decent condition - fully functional with some road rash that's been painted over. Aesthetically, it passes the 1 foot test. For reference, this is the Revzilla product page that has a list of compatible bike models...

Hi, I'm looking for an ASV Shorty Brake lever, model # BRC550S. The screenshot below is the compatibility list. If you have one, please let me know. Thank you.

(Edit to delete items purchased) Hi, I'm looking to buy the following for a 1299 Panigale S: OEM: - Left side shifter - 45612092BA - Clutch lever - 63140501A - Front fairing - Red - 481P1182AA - Up/down switch - 65140201B - Lower steering base - 34220681AA Aftermarket: - Rearsets (prefer...

Hi I have tried to adjust my gear level as its a bit to high and I need to lower it as ive missed a few gears etc, I have tried following the instructions in the owners manual but I still cant get it to adjust. I have loosened nut 2 however I cannot get the long spindle arm 1 to turn, I tried...

just like the header says. looking for brake lever for 1199. pm me

Hey guys I have these ducabike clutch levers https://amsducati.com/ducabike-ducati-evo-ii-brake-clutch-lever-set-type-2 It has so much free play that it rattles back and forth as I'm riding. Is this normal? I have a 2014 Ducati 1199 abs Link here for the video

Hi everyone, I was installing my crg carbon levers the other day and I lost one of the set screws for the plunger. Does anyone know where I could find another one or does anyone know the size? I posted in the WTB section for any damaged levers also so fingers crossed. Thanks for any help in advance.

Hi everyone, I'm looking for either a clutch or brake lever from a 1199/1299/899 etc. I don't care if it's bent, broken or scratched. All I'm after is the stupid little set screw that holds the plunger rod in the sleeve. I lost one when I was installing CRG Carbon levers. I would also just take...

So I guess the front brake lever has a pin so it cannot be rotated down. Has anyone fixed this by removing the pin. I have not done anything yet, but after my ride today it is time. I just want to be cautious and not somehow screw up something else with a bike so complex. But man, I need to...

I am expierincing some shifter issues, it seems as if the shift lever is lose (not rattle lose) but it goes through the foot peg holder and seems to be on a brass bush. On both ends it has an o ring, when I move the lever by hand it seems this play is excessive? But when I put the bolt into its...

Hello everyone, I recently install some CRG carbon fiber levers, but now I’m having trouble shifting in and out of gears. The dimple that goes into the rubber boot on both sides doesn’t look right either. The bike does start so the clutch pin is installed correctly, but man the travel for the...

https://photos.app.goo.gl/aBmgq772zbc7RdRj1 I bought this for my race bike but ended up getting a set of woodcraft clip ons as a gift so this won't work. 90$ shipped in con US.

1299 Panigale Clutch Lever - New condition Perfect Condition, sold the bike and have the lever...first reasonable offer takes it. Thanks, Richard

Simple but very useful mod to the standard crap gear lever set up. Bush removed and a needle bearing pressed into the lightly milled receiver in the hanger. The lever shaft sleeved to fit the bearing Feels tight smooth and high quality. No play unlike the sloppy standard set up. Sent from...

Are the TWM standard length levers still shorter then the OEM levers? Trying to decide to go shorty or not. I do mostly 2 finger on both levers, but have read that the shorts may squish the fingers. For those who have them, what's your opinion of these?

Mint 899 Brake Lever - $100 shipped to the lower 48

Hi everyone, looking for an aftermarket clutch lever I would prefer a DP lever since I bought a brake lever from another member. Let me know what you have and we will go from there.

Hey guys , I read a bunch of you having the same issues that I have with quickshifter. I found my shift lever to have a little bit of play movement and also to have an unnatural angle ...basically to select 5 and 6 gear , the foot reaches a really uncomfortable angle and the shifting is totally...

I didn't want to use the bar ends that came with the TWM lever guard as they are light weight and the 7/8" diameter looked dinky. I prefer the stock bar ends because of the 6-7oz weight to help reduce vibration and they look beefier, but are obviously to big to attach the lever guard to. So I...

Is someone making similar product for panigale? ( leverguard/mirror) (Similar like this honda motogp replica)