loose

Maybe left when they installed the exhaust? Any ideas where it is from? Sent from my iPhone using Tapatalk

Hello, I recently installed a ducabike pressure plate ring & clear clutch cover. I noticed my clutch is loose. Did not get a ducabike pressure plate Can anyone give me detailed advice how to fix?? Thanks guys

Well, I have another odd issue that's come up. The heat shield around my left can has come completely loose and slides back and forth as per my pictures. Theres absolutely not bolts holding these things in place from what i see and per the parts catalog, the 'silencer' as they call the cans...

After the 1199 1299 series of bikes there was a common problem of bolts coming loose so I think the factory have taken this on board . The new V4 seems to have red Loctite on everything which is making things really painful with taking things apart . I have attempted to remove the rear sub...

Hey all, I have to tighten my chain up on my Diavel about every second time I go on a ride for a few hours. Can anyone tell me any tricks there may be to stop it from coming loose. I don't have a talk wrench but I do it up pretty damn tight after adjusting so is there anything else I should be...

Can someone please respond with a list of bolts that I should check for looseness 2013 1199s

First thread and glad its a good one. Picked up a 2013 1199 3 weeks ago and once i got the bike loaded up i noticed the mirror was loose. Asked the seller and of course he had no idea lol. Googled this and i come to find out its a common issue with the mirrors pivot point becoming loose and...

Dear gents, In your professional opinions, do you think when I install the larger FM RACING exhaust header, that I could still make the bike have power down low at slow Rpms? I'm hoping the RAPIDBIKE race will take care of any bogging/ chugging...( presently my bike runs great with full Termi...

Getting bike ready for 10K cross Canada trip at end of month. While checking every bolt and torque specs, the exhaust heat shield was loose of the left side. Bolt in picture is tight, but large gap between washer and heat shield. This has loosened up in last week or two. The heat shield can...

Working on a different project (new signals) I saw this. Smells like fuel? Should be connected? Please assist all knowing ones...

I just picked up the Ducati Performance 1199 Race Seat for my 14' R. I noticed that around the Ducati Performance logo near the back of the seat it feels like there is an air gap between the logo and the padding below it. Basically I can press on the fabric and there is air gap under it. Does...

When I was dismantling my standard exhaust to replace with the Akra, I came across some loose bolts on the attachments for the standard mufflers. That same night I saw a thread where someone was having some vibration problems. Probably not connected but perhaps worth checking these bolts next...

hey guys, my right mirror seems loose. it moves around very easily and after about 60mph or so, it pivots in very easy. i dont know how to tighten the mirror or if there is a way. any ideas?

i m not the easily intimidated or discontented guy, but whilst disassembling the bike to do the engine job, it was found that the nuts holding the bolt the engine hangs on the frame with, had rattled loose from those bolts and were floating in the airbox. there is nothing holding them back from...

Took off my pillion pegs the other day and found one bolt missing. I usually check over the bike pretty regularly but this one got past me. Just thought I would pass it on. If I ever fit them again I will use locktite. For information.

Well, I'm another victim of the loosening parts. I lost a screw holding my heat shield on the right muffler. And the other is loose too. I was cleaning up the bike and getting it ready for a long cold winter when I noticed the shield was rattling. I'm hoping that it can be covered under...

After the 1st service, notice the chain is hitting the exhaust, a further look, noticed the swingarm pinbolts were completely loose, Shame on dealer. Went and got the chain tool thinking it's a quick fix, that eccentric hub just won't budge, so before I cause serious damage to myself or the...

YouTube Bittersweet today. Took delivery of my panigale abs standard. Rode home and this is what I found.

He everyone, just wondering how many have actually experienced losing their rear resevoir cap. I haven't, but seem to recall seeing a few posts implying this is common. FWIW, I secured mine for next to nothing using a cable holder, a zip tie and some rtv. I just used some trimmers to cut the...

Good evening everyone, After a short ride this afternoon the rear suspension felt weird. Attached is a picture of my swingarm pivot bolt (for lack of Italian tech word). Torque is 100Nm (just spoke with the dealer). 3800KM on the bike with a dealer inspection at 1000-1500. Picture is...