mystery

Hello, my name is Logan. I had put on a new clear clutch cover on my bike. Clutch felt stiff, the fluid disappears causing an air pocket in the line. I bleed it out of the clutch master cylinder, and I was trying to bleed the fluid near the shifter. However all of the fluid is just going out of...

anybody had an issue when installing an aftermarket 520 conversion sprocket and carrier? I have a 41 tooth sprocket on the carrier and when installing on the bike it sits way to far back? Like the sprocket edge is almost touching the swingarm. Looking along the chain guide from the rear to the...

Hi Guys .. does anyone know where this little rubber plug lives ?? I found it loose and wedged between the upper fairing and the tank on the right side where the grommet connects to the fairing .. I've not seen this on previous removal of the fairing ..

As many of us have, I have missed 30-40% of my work duties drooling in detail to the new V4 videos online since the Milan show, Valencia tests, and all of YouTube, yet I cannot figure out precisely what the two red lights are indicating (top of dash - one right and one left)? Does anybody know...

I am removing the front faring on my 2012 1199 so that I can put on some track bodywork. In doing so, I find a mystery black box fixed with double-sided tape to the side of the front faring, which is wired into the main wiring harness. :confused: It looks like something that was added as an...

Hi folks, Just wrapping up a rebuild and I cannot find what this plug is for. I have the factory 1299S wiring diagram and easily found everything except for this. It comes out of the loom for the ABS module (big plug). It is the only other connector on that branch and it is short so whatever...

in the right side electronics tray of my 1299S, I found a mysterious plug that's not used. Obviously, it must have a use, and it's marked with "MELCOTOOL"....what is it for?

I do a lot of my own installation work, but am by no means a talented mechanic. I'm often finding myself with leftover bits. Installing the EarthX lithium battery was a pain; the adapters didn't quite fit, which meant tedious time with a Dremel. Anyways, I button her back up and find this...