pin

Hi Im thinking of buying the T-Rex-Racing front head lift stand and rear stand. But Im not sure what pin size I need. I read somewhere that its 28.8mm and that the pit bull one is #28S. T-Rex Racing only goes up to 27mm. Anyone know if the T-Rex Racing 27mm would fit a 1299?

Does anybody have the dimensions for this pin? I intend to machine one as nobody local carries it in stock and I'm impatient.

Hi all, Looking to verify that I have my terminology correct first off- The piece that the rearset connects to (it has two bolts that go into the engine block and one that secures a clamp around a pin coming out of the swing arm).. I believe this is the "LH/RH PIN SUPPORT", but not sure. If...

I know there has been a few threads about stands but I could not find the specific info. I see what looks to be a punch out location under the triple. Does it snap out or do you literally have to punch the tabs out to gain access? Also does anyone know the actual pin size for the triple?

Would someone be so kind as to send me/post the dimensions of the #28s front pin and I will machine myself one. Im in a bit of a pinch and have access to a front stand but no #28 pin. Dimensions: D- being the angle (im not sure this really very crucial? so an approximation would probably do)...

Would someone be so kind as to send me/post the dimensions of the #28s front pin and I will machine myself one. Im in a bit of a pinch and have access to a front stand but no #28 pin. Dimensions: D- being the angle (im not sure this really very crucial? so an approximation would probably do)...

Hi Guys, Just wondering if anyone who went to the opening round of 2014 WSBK at Phillip Island bought a memrobillia pin and is looking to sell it. If so please drop me a line and what you want for it. Many thanks Mark

I am thinking about getting a front yoke stand for my panigale which has a pin diameter of 28,90mm, and I also wanted to get a pin fabricated so I could use the stand with a Monster 821. (the bikes are in winter storage and not accessible to measure myself) So the question is, does anyone...

In stock: CORSE DYNAMICS Titanium Cush Drive Pin: BST Wheels Price: $149.95 / Set Extremely light weight and durable grade 5 titanium cush drive pin to replace the factory steel part. Nearly half the weight of the steel pin. Includes a set of 5 * FREE continental USA shipping on...

In stock: CORSE DYNAMICS Titanium Cush Drive Pin: BST Wheels Price: $149.95 / Set Extremely light weight and durable grade 5 titanium cush drive pin to replace the factory steel part. Nearly half the weight of the steel pin. Fits double sided swingarm wheels only. Includes a set of 5...

Hi all, I'm looking to buy or borrow (Bay Area) the Pit Bull front head lift pin #28 for the 1199R - just needed for a fork adjustment so would be even better if I could borrow one for a day. Thanks in advance! Chris

Hey guys in so screwed... i just bought a Crg break and clutch lever for my 2014 1199. The problem is when i was swaping the old lever for new ones i accidentely broke the micro pin that activate the break.. and they said i would need to buy a OEM breal lever just for tha pin... what can i do...

What would cause it to back out? Also can I just take pressure off the swing arm and tighten it back up? Sent from my SAMSUNG-SGH-I337 using Tapatalk

Hi all, I'm looking to get a front lift stand to remove the forks however I need to make sure the pin size is correct. Could someone please tell me what sized pin is required for the 1299? Thanks Al

He all Been trying to find out the difference between the air temperature sensor located on the headlight. Mine broke when I smoked a deer and now I have an engine light so decided to order a new one thinking they should all be the same. But my 2012 is 2 pins The one I ordered, not sure...

Hello I have a Pit Bull motorcycle stand for my Ducati 1199s and noticed that the stand only works on the none chain side with eh larger hole. Does anyone no what pin number is for the chain side so I can have both sides.

Brand new, 5 miles on it. Paid $22,500 plus TTL. They picked up first service and added a comfort seat. Not sure if this is a good deal or not, but at this point don't really care. First impressions, the Termi exhaust sounds AWESOME. Not sure how it compares to stock, just know it is...

It's been pulling at me for some time...I've tried to talk myself out of the justification and the cost and all that goes with it but I finalized on a 2013 new, still in crate 1199R. I'm so over the moon that it's emotional. I am very lucky as I never dreamed when I had my first street bike...

Anyone know the pin size for the lower triple? Thx- Dan

I bough a replacement carbon fibre rear mud guard from Ebay. Mostly because of the additional carbon fibre pieces that this person makes and I'd like to keep all the carbon fibre parts looking the same. Anyway, the new pieces arrived today and I was disgusted to find that you could see light...