preload

I have a question about the fork preload adjustment on a Streetfigher V4. In the manual (german) it says to start on a fully opened setup. The say to fully open it it should be turned all the way clockwise and then turned 7 rounds counter-clockwise to set it to normal street preload. My...

Howdy stupid Front Preload Question RE:: Is 6 turns equal to 6MM ? After discovering the plethora of Dave Moss videos - I'm trying to dial in my Front Fork Preload. The 1199 Base Manual says "Spring Preload - Fully Open(counter clockwise)6MM. I've read a few riders say stock was "6 turns...

I have a a panigale V4s I want to put more preload on the front fork I know I have to disconnect the electric wires But then, do I give it a few turns on both forks? Or just one? Sorry for the stupid question, but some were I saw there were some forks that you just adjust one for...

Hey all, I'm trying to get rider sag under 30 mm on 1199S front forks for the track, but I'm two turns from maxing out and only at 33 mm. I weigh 160 w/o gear, so maybe 175-180 w/ gear? Anyone else having an issue with the getting the correct track rider sag? Seems like adjustability is limited...

CORSE DYNAMICS ÖHLINS Wrench: Ducati 1299/1199/899 /959 Panigale - Preload and Shock Length $24.95 * Wrench for Ducati 1199 offering dual function - Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure no...

CORSE DYNAMICS ÖHLINS Wrench: Ducati 1199 Panigale - Preload and Shock Length $24.95 * Wrench for Ducati 1199 offering dual function - Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure no marring of the...

CORSE DYNAMICS ÖHLINS Wrench: Ducati 1199 Panigale - Preload and Shock Length $24.95 * Wrench for Ducati 1199 offering dual function - Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure no marring of the...

CORSE DYNAMICS "NON SLIP" ÖHLINS Wrench: Ducati Panigale - Preload and Shock Length $24.95 Wrench for Ducati 1299 / 1199 / 899 with a dual function - "NON SLIP" Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure...

Any threads on how to due preload adjustment I am assuming 35-40mm of sag

CORSE DYNAMICS ÖHLINS Wrench: Ducati 1299/1199/899 /959 Panigale - Preload and Shock Length $24.95 Wrench for Ducati 1299 / 1199 / 899 with a dual function - "NON SLIP" Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to...

CORSE DYNAMICS "NON SLIP" ÖHLINS Wrench: Ducati Panigale - Preload and Shock Length $24.95 Wrench for Ducati 1299 / 1199 / 899 with a dual function - "NON SLIP" Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure...

CORSE DYNAMICS "NON SLIP" ÖHLINS Wrench: Ducati Panigale - Preload and Shock Length $24.95 Wrench for Ducati 1299 / 1199 / 899 with a dual function - "NON SLIP" Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure...

CORSE DYNAMICS "NON SLIP" ÖHLINS Wrench: Ducati Panigale - Preload and Shock Length $24.95 Wrench for Ducati 1299 / 1199 / 899 with a dual function - "NON SLIP" Preload adjuster wrench with multiple engagement points - Ride height adjuster wrench Constructed of aluminum to ensure...

Just wondering if anyone here experienced the same thing. The bike 1299S. Preload adjuster nut on the RIGHT fork always move into a different position after a ride. After setting sag, both electronic connector on the fork was positioned in a MINUS (9-3) orientation. But after awhile, the...

Can any of the lucky guys who already have a 1299S let me know the size of the fork preload hex nut ??? Thanks !!!

Is there a tool (socket or wrench) avialable to buy for adjusting fork preload that doesn ´t damage the nice hex nut finish ??? Or maybe a tip for doing it without damaging the finish with a standard socket or wrench ??? Thanks !!!

Some quick info needed please: 1) What is the approx static sag for an 1199S/Tri - it should be same from bike to bike - yes? 2) How many 360 turns are there from full out min, to full in max preload? FWIW, I'm at 5-turns out from max, giving me a rider sag of 13mm. Just looking for...

Where to cabels go?

Hi, I'm gonna preface this by saying that I'm a little lazy and don't have anyone to help me unload the bike, measure static sag etc..... So, could someone please give me a few tips here, as I'm sure that preload settings should be pretty transferable, based on rider weight. I'm around...

I've been looking and was wondering if there is an add on so I can get rid of the manual preload nuts. I don't think I could get the required 40mm clearance, do they sell shorter springs? I found this, stateside anyone? http://mcet.de/eshop/en/en-Ohlins-hydraulic-preload-adjusters-intern-TTX...