pressure

I searched the forums and I found several threads on torque, but I could not find a thread specifically asking what my issue is. I have a 07 1098 S. I recently replaced the clutch pressure plate with the rizoma star pressure plate. If I tighten down the clutch pressure plate bolts to 5 Nm, as...

What is the nominal fuel rail pressure for the 1299?

I recently started rebuilding the 1199 race bike back to original so it can operate again on the street. However I found two issues which gave problems. First was the left handlebar switch which didn't operate 100%. This was luckily solved by installing a free new service wiring part in the...

Has anyone noticed any 'more' pressure on their wrist when riding a v4 vs. a 1299? I'v only sat on the V4 for all of 30 seconds (didn't ride it yet) and it seemed to push me more forward putting more pressure on my wrists. With the 1299 stock seat I feel like i'm sitting more 'in' the bike where...

I was installing my new CNC racing frame sliders and decided to install the Ducabike clutch pressure plate inside my Ducabike clear clutch cover. I removed the ducabike pressure spring ring. Then pulled the stock pressure plate out. Saw I couldnt get the inner bearing out with the sleeve and...

Hi guys. Just bought the CNC racing frame sliders in red and black to replace my Sato Racing ones. And I bought a black ducabike clutch pressure plate to go with the ducabike clear clutch cover and ducabike pressure plate ring. However I after removing the pressure plate I cant seem to get the...

I'm currently filling up parts bins in the garage awaiting the arrival of a 959 Corse (my first Ducati). I've recently been looking at the Ducabike clutch covers. If I change from stock to this then I'd probably want to change the pressure plate too and wondered how awkward/fiddly a job this...

Pressure plate question I recently swapped out my 1299 pressure plate with a ducabike one. I just noticed that the stock pressure plate has 3 metal snap rings at the base where the springs sits on. In ducabike's instruction it did not call for the rings to be used from the stock pressure...

Replaced brake fluid. Now there is no pressure. Any help would be appreciated. Bike - 2013 Ducati Panagale S 1199

Anyone else had issues with their clutch losing pressure, specifically/mostly when doing alot of clutchless up and down shifts? I notice it more when riding in the canyons, Ill get to the stop point and clutch will have almost no pressure, pump it and its back 90%. This happened with the stock...

Does anyone know what the size specs are for the 3 pressure plate bolts inside the clutch cover on a 2016 1299s? Thanks

--

Hello, I installed the woodcraft rearsets on my base model actually I have only installed the brake side so far. I have the pressure activated light switch for the rear brake but the instructions are not quite clear or I may be missing something. Anyone ran into this before and how did you fix...

We have a limited stock of discontinued Dainese suits from 2014-2015 on sale while supply lasts. DAINESE Aerster Div 2-Pc Perforated Suit Price: $1,549.95 Sale: $979.95 * FREE Shipping "¢ Composite protectors certified to EN 1621.1/97 Standard "¢ Pro-Shape protectors: certified to EN...

My gas tank has a hissing sound after riding. When I open the cap pressure is released. I recently installed the DP cap can I have installed it incorrectly to not allow venting?

I purchased an aftermarket gas cap. Screw on type. Now each time I got to fill up with gas and unscrew the gas cap the pressure inside the tanks causes gas to mist all over the tank once the cap is unscrewed. Thinking about going back to the org cap or trying to figure out why this is happening...

has been running 29/28, and yesterday i tried 31/28, feels pretty good what do you guys run? and how is the experience? thanks

This has been popping up again lately. I know i have posted this before but here it is again for people just trying the Q3 on the track. The info is straight from dunlop sent to me in an email. i just copied it and posted it in here. AGAIN THIS IS TRACK PRESSURE NOT STREET you will eat up...

I"m about to change the clutch cover out on the pain with the clear ducabike clear. I'm about to take the 3 bolts out on the inside to put on the pretty black piece you see through the window. Does anyone know if there is a certain Torque Pressure these have to be tightened to?:confused:

Good morning guys Does anyone know the pressure to run these tires on the road/track? Thanks