quick

Note: Before I removed shifter, quick shifter operated flawlessly I recently removed the gear shifter on my Panigale to add some lock tight to the pin that mounts it to the rear set. Once I installed the gear shifter back on the bike, my quick shifter doesn't work. Is there some sort of reset...

FOLLOW UP POST Iván lee, córdonas dealer has helped me out to solve this, and will replace my QS The instalation instructions were not very clear, and my QS was not installed in the best posible position. That caused the malfunction. CORDONA is working on making a more clear...

So I'd like a black sprocket. Sprockets without the quick change set up seems to be rare? I found this https://motowheels.com/i-23901013-superlite-525-pitch-direct-replacement-steel-rear-sprocket-panigale-1199-1299-v4.html?gclid=EAIaIQobChMI6bPh0eeZ5QIVAcZkCh3FSwHIEAQYBCABEgILe_D_BwE Is it...

What is the problem most of you have ? Recently, when cold I mean in the first 20 min of the ride I have had problems to shift into 2nd 3rd and 4th I push down and it kind of won't go down, feels like an air bubble And some times I have to push harder After this 20 min...

So I'm in the process of swapping out the OEM stuff for the quick change stuff and have a question about the washer that sits between the OEM hub and the bearing. It appears as thought the Superlight hub does not use it. There is a slight recessed area for it to sit in on the OEM hub but not the...

Just replaced the stock quick shifter with the Cordona unit and took it for a short ride, very impressed in how much more seemless shifts are now. Very easy to install, plug and play. I live in the U.S. so ordered from Ivan Lee at 1-604-873-4826 if interested.

Ok Im sure this has been discussed over and over again. So here goes. HM quickshifter or Translogic quickshifter for the 1299? And which other addons from each vendor? Ok go and give me your reviews. Pros and cons and what else is needed with these quickshifters?

I've search forums and seems like I need to start with cleaning and Appling dielectric grease to the connectors and cleaning pins.. What connectors do I remove? I'm not sure exactly what to take apart in this picture? That's guys!!

So I see that there are or were a number of people who have had issues with the OEM Ducati quick shifter. My question is what specifically has failed with the unit? Is it a hardware issue or electrical issue?

So after doing a little research I decided I could not wait anymore for the Ducati Performance reverse shift kit. I was able to flip the knuckle to the top of the shaft. It looks like Ducati relieved an area on the frame where the quick shifter would hit so there looks to be enough clearance...

Hi all, Seeking some advice if an OEM Ducati 1199r 2015 quickshifter qill work on a 1199 2012 model. I'm aware that the 1199r 2015 QS allows for up and down shift and I'm just looking to get my upshift back. I'm riding a 1199 2012 model and my OEM quickshifter went kaput. Got a offer...

Hello Everyone. I am currently new to the forum and currently in the process of purchasing a new 1299S. I have a few questions regarding this motorcycle since this is the first Italian motorcycle I have every owned. First off, when does the 2 year warranty on the motorcycles begin? At the date...

Translogic updated the old unit (new model # as well) to address some of the weak points consumers raised. I just installed one on my R. While I noticed a significant improvement over the OEM module, I would still recommend purchasing aftermarket rearsets prior to adding a Translogic. I did...

I was looking around on the internet for up and down quickshifters for my 2015 S1000R and was looking around to find out whether the base 2015 1299 had a quickshifter that was up and down. I have the 2015 and it doesnt downshift. I know the base 1299 2016's quickshifter was up and down. Maybe...

Hey Guys, Have ordered my V4 for January.... I'm interested to know if everyone uses the quick shifter all the time?? Is the clutch just for standing starts now?? What else do you love about this bike that's new or different?

Happy Friday. Hope you enjoy my short little video of my return to racing. Turn up your sound. Big thanks to the wife for the encouragement to get back out there! Best, Blade nbSS3EGpPKk

i started off with an 05 749 in 2012, 2015 moved up to a 13 848 Corse and now i am looking to add an 1199 (1299 if i come across a deal) to the garage since i now have an adult job. Thing is i am not too knowledgeable on the different variants of the 1199, i see 2012s for 9k to 19k and about...

I recently installed Bonamici rearsets, and struggled to get a good set up using stock shift rods. Needless to say I made many adjustments to the whole set up until I found something that worked. I recently went to the track and was having a shift issue between 3-4 only. It was interrupting but...

Can the delay time for the DQS be changed via the menu. I scanned my manual for my 2015 1299S, but didn't see anything. Upshifts, using the DQS, seem to take a long time for the power to come back on. I can actually shift faster manually than the DQS. This is certainly not the case on my...

Came with the extra parts box on my 1199s I bought but I prefer the locking gas cap, so I never installed it. Not sure the brand. Looks new. $20 + actual shipping https://www.dropbox.com/s/67c302lz1nozd9d/20180611_181518.jpg?dl=0...