removed

Ok, just wondering if anyone has removed their charcoal canister from the 939 or 950? I believe its the same canister as every other Ducati out there? There's a really nice how to guide for the 1199 on this forum. I'm going to use this guide as an aid.

Are they stickers that can be removed via hair dryer or are they clear coated?

First thing I did was remove remove those awful engine covers .I understand they are there to stop the heat on your legs but firstly they look terrible and secondly they are going to retain heat at the bottom of the fuel tank will interesting to see if there are any issues there in the future

Well here is the story. Im looking to put a slip on kit and remove the flapper assembly. Im not really finding any definitive info on whether or not that combination absolutely needs an UPMAP installed. its just the oem header pipe and a different can, not sure why upmap is needed. Never had to...

I have a brand new 1299 and have had an issue with it stalling after it has been running and then turned off. Once you restart it it wants to stall at idle. I literally have to continuously give it a little throttle to keep it running. After searching through he forum I was thinking it was the...

Hi Guys, To get more airflow into my airbox with a BMC airfilter...a mechanic friend of mine suggested that when I remove the tank, to clean my BMC airfilter, I can simply do away and remove the oem screen on my original plastic air filter frame housing that holds the BMC or stock airfilter...

so I spent a few relaxing hours last night getting to the rear header pipe. It goes pretty quickly now: - tank off in 5min. very easy routine. - disconnect heatshield from subframe. Those screws underneath are a PITA. - remove lower two subframe bolts, loosen top two bolts, rotate tail upwards...

Ducati remours......... Panigale replacement? http://www.motorbiketimes.com/news/people/human-interest/rumours-of-updated-ducati-899-panigale-$21385638.htm

Ok so here's the problem...when I wear my riding jeans (kevlars) I always find that the screws that hold the shock guard in place rub against my jeans ( boots on the inside) causing them to tear..has anyone else had this problem? My thought was to remove the shock cover...the heads of the...

WSBK 1199 to have restrictors removed for the next race"¦. does anyone know if there is a weight penalty too? George Villar

Hi guy, I my race bike project - a lot of stuff has been removed. The servo is one of them. I will for now stay with the standard exhaust system and standard mapping. I read about this " exhausts servo eliminator" - but do I need this ??? When I turn the engine on - I have no warning...

Guys, Has anyone discovered a simple way to remove the little Gas Tank label? I tried a spray that is suppose to loosen the sticker but unfortunately it comes off in tiny pieces. Very tedious & slow way of doing it. Any ideas?