replacing

Hi, I recently trashed my front wheel speed sensor (ABS Light, Eng Light, yellow triangle, etc. now on). I used tire warmers on a track day and thought nothing of it when it kept getting snagged. As a result, the sensor wire came loose from under the fender and rubbed on my tire eventually...

Hi guys, I have a 2013 Ducati 1199 and one of the low-beam lights have burnt out recently so I went online to look for solutions. I came across this simple tinkering video to do a headlight swap on youtube: rQ5psr7kdV8 In the video, at around 1:41 the video shows the simple process of...

NEED HELP... replacing coolant fluid on my 1299 I need to replace my coolant fluid on my 1299 and i have no idea how.. can someone help? just need instructions.

Hi there guys, So recently I had somebody try setting up the suspension on my '13 1199.... Everything went fine until he was messing with the rebound. No rebound at all! Started doing some research and found out that is a common problem with the 1199 base (Marzocchi forks). He tried to...

I'm currently filling up parts bins in the garage awaiting the arrival of a 959 Corse (my first Ducati). I've recently been looking at the Ducabike clutch covers. If I change from stock to this then I'd probably want to change the pressure plate too and wondered how awkward/fiddly a job this...

Is there another way of replacing the windscreen without dismantling the front nose as well? And how do you hold onto the grommets when removing the screws? Tried youtube but didn't show to much Sent from my SM-G900I using Tapatalk

i think others are more qualified than hayden but i am such a fan of hayden that i really like this http://www.motorsport.com/motogp/news/hayden-replaces-pedrosa-at-phillip-island-840021/

Do you guys know where to get cheap racing decal fairings?? We need to buy from a reputable company that doesn't take 3 to 6 months before they ship after they've taken your money. Have been having lots of bad luck from dodgy Chinese operators on Ebay that keep your money for 3 months at...

Hi guys This is my first post! So hello to you all! This looks like a great place to hang out and I very much look forward to chatting with you all about all things Ducati! As my name suggests, I am a bit of a noob on the Panigale front. This is my first proper "big" bike after owning...

Hi Guys, I am waiting for my chain and sprocket replacement kit from sprocket center. Its the same stock set up 15t/44t. my question, is there a DIY for the front sprocket? based on the manual I have remove the bracket that is on the way?? is there a quick way to go about doing this...

So I am changing out my sucks shock to a TTX GP and need a bit of advising on how to set the ride height and setup the new shock after install? Thanks Mike

So I ordered the slightly higher tinted screen from my Ducati dealer along with the oil cooler guard for my 1299S. Now the dealer wanted to charge me $348 just to install these two items to which I politely told him where to go. So my question is it really can't be that hard to install these two...

Hello ! My brake fluid reservoir has a leak and the DOT 4 oïl has damaged the windsheild, I have received from my dealer a brand new windsheild and i have ordered a torx tool to remove the fasteners. But my question is ... I have heard it's a pain in the ass to replace it because of the...

My new Ohlins spring arrived today (thanks Jarel) and I was wondering how hard it would be to replace it myself. It LOOKS like it would be easy but... After the plan is to take it to the dealer to set sag. Thanks-

In an effort to get better heat management I recently replaced my stock engine tubing with racing tubing. In my case I went with Samco RED tubing which is good for 163 Degrees ; Even though the bike easily gets over 200 degrees. Couple of observations, the bike's overall temperature appears...

has anyone needed to replace their stock clutch yet? at least with another stock one? Im wondering about cost?? I was at the drag strip and never had a problem but my buddy did with his CBR...its much older than my 1199 but it just made me think and wonder. I dont really see the need to...

I am thinking about replacing the factory mirrors, any suggestions on what would be best? Should I install some bar end mirrors and replace the OEM mirror holes with turn signals? - Eddie

I'm replacing the stock springs on the Ohlins shock to the 150-160lb spring. Do I then need to also replace the shock springs as well?